|
|
Datasheet ME12P04 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | ME12P04 | P-Channel 40-V (D-S) MOSFET ME12P04/ME12P04-G
P- Channel 40-V (D-S) MOSFET
GENERAL DESCRIPTION
The ME12P04 is the P-Channel logic enhancement mode power field effect transistors are produced using high cell density, DMOS trench technology. This high density process is especially tailored to minimize on-state resistance. These |  Matsuki | mosfet |
| 2 | ME12P04-G | P-Channel 40-V (D-S) MOSFET ME12P04/ME12P04-G
P- Channel 40-V (D-S) MOSFET
GENERAL DESCRIPTION
The ME12P04 is the P-Channel logic enhancement mode power field effect transistors are produced using high cell density, DMOS trench technology. This high density process is especially tailored to minimize on-state resistance. These | Matsuki | mosfet |
ME1 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | ME100603 | Diode, Rectifier American Microsemiconductor diode | | |
| 2 | ME101203 | Diode, Rectifier American Microsemiconductor diode | | |
| 3 | ME101603 | Diode, Rectifier American Microsemiconductor diode | | |
| 4 | ME1117 | 1A Low Dropout Voltage Regulator 1A Low Dropout Voltage Regulator
GENERAL DESCRIPTION
The ME1117 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1A input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, Matsuki regulator | | |
| 5 | ME1117 | 1.0A Adjustable Voltage High Speed LDO Regulators ME1117
1.0A Adjustable Voltage High Speed LDO Regulators ME1117 Series
General Description
The ME1117 series are highly accurate, low noise, LDO Voltage Regulators that are capable of providing an output current that is in excess of 1.0 A with a maximum dropout voltage of 1.3 V at 1.0A. This series  Microne regulator | | |
| 6 | ME1117-1.8 | 1A Low Dropout Voltage Regulator 1A Low Dropout Voltage Regulator
GENERAL DESCRIPTION
The ME1117 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1A input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, Matsuki regulator | | |
| 7 | ME1117-2.5 | 1A Low Dropout Voltage Regulator 1A Low Dropout Voltage Regulator
GENERAL DESCRIPTION
The ME1117 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1A input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, Matsuki regulator | |
| Esta página es del resultado de búsqueda del ME12P04. Si pulsa el resultado de búsqueda de ME12P04 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |