DataSheet39.com

What is P6SMB82A?

This electronic component, produced by the manufacturer "Luguang Electronic", performs the same function as "Glass Passivated Junction Transient Voltage Suppressor".


P6SMB82A Datasheet PDF - Luguang Electronic

Part Number P6SMB82A
Description Glass Passivated Junction Transient Voltage Suppressor
Manufacturers Luguang Electronic 
Logo Luguang Electronic Logo 


There is a preview and P6SMB82A download ( pdf file ) link at the bottom of this page.





Total 3 Pages



Preview 1 page

No Preview Available ! P6SMB82A datasheet, circuit

P6SMB SERIES
Glass Passivated Junction Transient Voltage Suppressor
VOLTAGE - 6.8 TO 550 Volts
600 Watt Peak Pulse Power
Features
• For surface mounted applications in order to
optimize board space
• Glass passivated junction
• Built-in strain relief
• Excellent clamping capability
• Low profile package
• Low inductance
• Excellent clamping capability
• Fast response time: typically less than
1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds at terminals
Mechanical Data
Case: JEDEC DO-214AA Molded plastic
TerminalSolder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Standard Packaging: 12mm tape(EIA STD RS-481)
Weight: 0.003 ounces, 0.093 grams
DO - 214AA(SMB)
4.7± 0.25
5.4± 0.2
1.3± 0.2
0.2± 0.05
Dimensions in millimeters
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use CA Suffix for types P6SMB6.8CA thru types P6SMB550CA Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (Note 1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VALUE
Minimum 600
SEE TABLE 1
1.0
100
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 5.0mm2 (0.03mm thick) Copper Pads to each termina
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Watts
Amps
°C
http://www.luguang.cn
Free Datasheet http://www.datasheet4u.com/


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for P6SMB82A electronic component.


Information Total 3 Pages
Link URL [ Copy URL to Clipboard ]
Download [ P6SMB82A.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
P6SMB82The function is Surface Mount Transient Voltage Suppressor. Taiwan Semiconductor CompanyTaiwan Semiconductor Company
P6SMB82The function is 600 Watts Surface Mount Transient Voltage Suppressor. Fuji ElectricFuji Electric
P6SMB82The function is TVS Diode, SMD (Transient Voltage Suppressor). Pan Jit InternationalPan Jit International

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

P6SM     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search