DataSheet.es    


PDF SN8P2604A Data sheet ( Hoja de datos )

Número de pieza SN8P2604A
Descripción 8-Bit Micro-Controller
Fabricantes SONiX Technology Company　
Logotipo SONiX Technology Company Logotipo



Hay una vista previa y un enlace de descarga de SN8P2604A (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! SN8P2604A Hoja de datos, Descripción, Manual

SN8P2604A
USER’S MANUAL
Version 0.3
www.DataSheet4U.com
SN8P2604A
SN8P26042A
SN8P2604A
8-Bit Micro-Controller
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Version 0.3

1 page




SN8P2604A pdf
SN8P2604A
8-Bit Micro-Controller
6.6 INT0 (P0.0) INTERRUPT OPERATION......................................................................................... 63
6.7 INT1 (P0.1) INTERRUPT OPERATION......................................................................................... 64
6.8 T0 INTERRUPT OPERATION ....................................................................................................... 65
6.9 TC1 INTERRUPT OPERATION..................................................................................................... 66
6.10 MULTI-INTERRUPT OPERATION............................................................................................... 67
77 I/O PORT ................................................................................................................................................ 68
7.1 I/O PORT MODE ............................................................................................................................. 68
7.2 I/O PULL UP REGISTER ................................................................................................................ 69
7.3 I/O OPEN-DRAIN REGISTER........................................................................................................ 70
7.4 I/O PORT DATA REGISTER .......................................................................................................... 71
w88ww.DaTtaISMheEetR4US.c.o..m............................................................................................................................................... 72
8.1 WATCHDOG TIMER...................................................................................................................... 72
8.2 TIMER 0 (T0) ................................................................................................................................... 74
8.2.1 OVERVIEW............................................................................................................................. 74
8.2.2 T0M MODE REGISTER ......................................................................................................... 74
8.2.3 T0C COUNTING REGISTER ................................................................................................. 75
8.2.4 T0 TIMER OPERATION SEQUENCE................................................................................... 76
8.3 TIMER/COUNTER 1 (TC1) ............................................................................................................ 77
8.3.1 OVERVIEW............................................................................................................................. 77
8.3.2 TC1M MODE REGISTER....................................................................................................... 78
8.3.3 TC1C COUNTING REGISTER .............................................................................................. 79
8.3.4 TC1R AUTO-LOAD REGISTER............................................................................................ 80
8.3.5 TC1 CLOCK FREQUENCY OUTPUT (BUZZER)................................................................ 81
8.3.6 TC1 TIMER OPERATION SEQUENCE ................................................................................ 82
8.3.7 TC1 TIMER NOTICE .............................................................................................................. 83
8.4 PWM1 MODE .................................................................................................................................. 83
8.4.1 OVERVIEW............................................................................................................................. 84
8.4.2 TC1IRQ AND PWM DUTY.................................................................................................... 85
8.4.3 PWM PROGRAM EXAMPLE ................................................................................................ 86
8.4.4 PWM1 DUTY CHANGING NOTICE..................................................................................... 87
99 INSTRUCTION TABLE ....................................................................................................................... 89
1100 ELECTRICAL CHARACTERISTIC .............................................................................................. 90
10.1 ABSOLUTE MAXIMUM RATING ................................................................................................ 90
10.2 ELECTRICAL CHARACTERISTIC............................................................................................... 90
1111 DEVELOPMENT TOOL .................................................................................................................. 91
1122 OTP PROGRAMMING PIN............................................................................................................. 91
SONiX TECHNOLOGY CO., LTD
Page 5
Version 0.3

5 Page





SN8P2604A arduino
SN8P2604A
8-Bit Micro-Controller
1.4 PIN DESCRIPTIONS
PIN NAME
VDD, VSS
TYPE
P
P0.2/RST/VPP
I, P
XIN
XOUT/Fcpu
I
I/O
www.DPa0ta.0Sh/IeNeTt40U.com I/O
P0.1/INT1
I/O
P1.0~P1.1
I/O
P1.2~P1.7
P2.0~P2.7
P5.0~P5.2, P5.4
I/O
I/O
I/O
P5.3/BZ1/PWM1 I/O
DESCRIPTION
Power supply input pins for digital circuit.
P0.2: Input only pin (Schmitt trigger) if disable external reset function.
P0.2 without build-in pull-up resister
P0.2 is input only pin without pull-up resistor under P0.2 mode. Add the 100 ohm
external resistor on P0.2, when it is set to be input pin.
RST: System reset input pin. Schmitt trigger structure, low active, normal stay to “high”.
VPP: OTP programming pin.
Oscillator input pin while external oscillator enable (crystal and RC).
XOUT: Oscillator output pin while external crystal enable.
Fcpu: Signal output pin while external RC mode enable.
Port 0.0 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
INT0 trigger pin (Schmitt trigger).
Port 0.1 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
INT1 trigger pin (Schmitt trigger).
TC1 event counter clock input pin.
Port 1.0, P1.1 bi-direction pin and open-drain pin. Schmitt trigger structure as input
mode.
Built-in pull-up resisters.
Port 1.2~P1.7 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Port 5 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
Port 5.3 bi-direction pin. Schmitt trigger structure as input mode.
Built-in pull-up resisters.
TC1 ÷ 2 signal output pin for buzzer or PWM1 output pin.
SONiX TECHNOLOGY CO., LTD
Page 11
Version 0.3

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet SN8P2604A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SN8P26048-Bit MicrocontrollerSONiX Technology Company
SONiX Technology Company
SN8P26042A8-Bit Micro-ControllerSONiX Technology Company
SONiX Technology Company
SN8P2604A8-Bit Micro-ControllerSONiX Technology Company
SONiX Technology Company

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar