|
|
Número de pieza | TA2003PG | |
Descripción | AM / FM Radio IC | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TA2003PG (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
No Preview Available ! TA2003PG/FG
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA2003PG,TA2003FG
AM / FM Radio IC
The TA2003PG, TA2003FG are AM / FM radio IC (FM F / E+AM
/ FM IF) which are designed for AM / FM radios.
Combining with the TA7368P (Mono PW IC), a suitable AM / FM
radio system is able to be constituted.
www.DataSheet4U.com
Features
• FM IFT, AM IFT and FM detector coil are not needed.
• Pin compatible of TA8164P.
• Operating supply voltage range
: VCC (opr) = 1.8~7V (Ta = 25°C)
TA2003PG
TA2003FG
Weight
DIP16−P−300−2.54A: 1.00g (typ.)
SSOP16−P−225−1.00A: 0.14g (typ.)
1 2006-04-11
1 page Pin
No.
Symbol
13 FM OSC
14 AM / FM SW
www.DataSheet4U.com
15 FM RF out
16 AM RF in
Contents
FM local oscillator terminal
Oscillator coil is connected.
AM / FM switch connected to
Pin(14) VCC→FM mode
Pin(14) open→AM mode
FM RF coil is connected.
Input of AM RF amplifier
TA2003PG/FG
Internal Circuit
AM / FM SW 14
13
MIX
GND1 2
6
VCC
14
GND2
9
cf. pin(1)
6
VCC
16
GND1
2
Terminal
Voltage(V)
AM FM
0.9 3.0
0.9 3.0
3.0 3.0
3.0 3.0
5 2006-04-11
5 Page TA2003PG/FG
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice. 021023_D
060116EBA
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
www.DataSheet4U.com such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc. 021023_A
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk. 021023_B
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others. 021023_C
• The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E
About solderability, following conditions were confirmed
• Solderability
(1) Use of Sn-37Pb solder Bath
· solder bath temperature = 230°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
· solder bath temperature = 245°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
11
2006-04-11
11 Page |
Páginas | Total 11 Páginas | |
PDF Descargar | [ Datasheet TA2003PG.PDF ] |
Número de pieza | Descripción | Fabricantes |
TA2003P | AM/FM RADIO IC | Toshiba |
TA2003PG | AM / FM Radio IC | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |