DataSheet.es    


PDF AT71201M Data sheet ( Hoja de datos )

Número de pieza AT71201M
Descripción full-frame sensor based on charge-coupled device (CCD) technology
Fabricantes ATMEL Corporation 
Logotipo ATMEL Corporation Logotipo



Hay una vista previa y un enlace de descarga de AT71201M (archivo pdf) en la parte inferior de esta página.


Total 20 Páginas

No Preview Available ! AT71201M Hoja de datos, Descripción, Manual

Features
Full-Frame Image Sensor 4096 x 4096 Pixels
11 µm x 11 µm Photo-MOS Pixel with 100% Aperture
Image Zone: 45 x 45 mm
Frame Readout Through One, Two or Four Outputs
Data Rates Up to 4 x 40 MHz (Compatibility with 7, 4 Frames/Second)
True 12-bit High Dynamic Range
Very Low Readout Noise
Very Low Dark Current (MPP Mode)
Optimized Resolution and Responsivity in the 400 - 1100 nm Spectrum
On-chip Thermometer for Each Quarter
Additional Full-Frame Operating Modes:
– 4/3 Aspect Ratio: 4096 x 3072
– 2/1 Aspect Ratio: 4096 x 2048
www.DataSheet4UB.icnonming 2 x 2 Pixels (Format 2048 x 2048 Pixels of 22 x 22 µm)
– Binning 4 x 4 Pixels (Format 1024x 1024 Pixels of 44 x 44 µm)
On-request Frame Transfer Architecture:
– 2048 Active Lines, One Memory Zone with Frame Readout Through One or Two
Outputs
– 2048 Active Lines, Two Memories Zones with Frame Readout Through Two or Four
Outputs
Applications
Flexibility and performance makes this device suitable for digital photography, graphic
arts, medical or industrial applications and scientific analysis.
16 M-Pixels
Sensor
AT71201M
Preliminary
Description
Atmel's AT71201M is a full-frame sensor based on charge-coupled device (CCD)
technology. It can be used in a wide range of applications thanks to operating mode
flexibility, very high definition and high dynamic range.
The nominal photosensitive area is made up of 4096 x 4096 useful pixels and is split
into four independent zones that are driven separately by four independent four-phase
clock sets. Thus the sensor can be used in up to 12 main modes.
The large format and high definition make the device suitable for any application
requiring precision.
The high sensitivity of the 11 x 11 µm pixels with 100% fill factor provides a large
bandwidth of response with up to 1100 nm wavelength.
Two serial registers and four independent output amplifiers offer a high-frequency
functionality at 40 MSPS and up to 7.4 frames per second with a high signal to noise
ratio.
Rev. 5328A–IMAGE–05/03
1

1 page




AT71201M pdf
Architectural
Overview
General Parameters
www.DataSheet4U.com
AT71201M
Table 2. General Parameters
Parameter
Value
Pixel size
11 x 11 µm²
Number of useful pixels per line
4096
Number of useful lines
4096
Number of extra lines
8 per register
Number of readout registers
2
Number of prescan CCD stages (per output)
16
Number of dark references (cells per line)
Number of outputs (2 per register)
24
4(1)
MPP mode/low dark current mode
Yes (image zone)
Anti-blooming functionality
Binning (summation) mode
no
Yes(2)
Pixel clocking mode
4-phase
Readout Register clocking mode
2-phase
Specific functions
Thermometer
Notes: 1. The full-frame version can be read through one, two or four outputs
2. The lines summation into the register is made by a specific timing diagram. The inte-
gration time should be adapted to prevent charge overflow.
A specific clock allows column summation.
The pixel size is 11 x 11µm2 with 100% fill factor (photo-MOS technology).
The sensor is compatible with a 180° rotation.
The image zone commands are split in 4 horizontal areas. The combination of the
ΦPij clocks allows various transfer configurations.
The serial registers are driven by 8 ΦLi clocks. An adapted combination of them allows
transfers of 100% of stages to the right side or the left side or 50% in each direction.
5328A–IMAGE–05/03
5

5 Page





AT71201M arduino
Timing Diagrams
Figure 5. Full-Frame Mode Timing Diagram
www.DataSheet4U.com
NBH pulses
... cleaning
Figure 6. Line Timing Diagram
Integration time
Readout time
(NBV pulses)
Period Tv = 9 x T0 (1)
Notes: 1. T0 = Master clock period (vertical transfer)
2. See Figure 4
AT71201M
PHIP1
PHIP2
PHIP3
PHIP4
PHITk
PHIL1(2)
PHIL2 (2)
PHILSj
PHIRj
Cleaning ...
PHIP1
PHIP2
PHIP3
PHIP4
PHITk = PHIP1
(2)
PHIL1
PHIL2 (2)
PHILSj
PHIRj
5328A–IMAGE–05/03
11

11 Page







PáginasTotal 20 Páginas
PDF Descargar[ Datasheet AT71201M.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AT71201Mfull-frame sensor based on charge-coupled device (CCD) technologyATMEL Corporation
ATMEL Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar