|
|
PDF PS8802-1 Data sheet ( Hoja de datos )
| Número de pieza | PS8802-1 | |
| Descripción | (PS8802-1/-2) 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SOP HIGH-SPEED PHOTOCOUPLER | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS8802-1 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
PHOTOCOUPLER
PS8802-1,-2
1 Mbps HIGH CMR ANALOG OUTPUT TYPE
8-PIN SSOP (SO-8)
HIGH-SPEED PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS8802-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side)
and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip.
The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is
suitable for high density applications.
FEATURES
• 40% reduction of mounting area (5-pin SOP × 2)
• High common mode transient immunity (CMH, CML = ±10 kV/µs MIN.)
• High supply voltage (VCC = 35 V)
• High isolation voltage (BV = 2 500 Vr.m.s.)
• High-speed response (tPHL = 0.8 µs MAX., tPLH = 1.2 µs MAX.)
• Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel
: PS8802-2-F3, F4: 1 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (option)
APPLICATIONS
• Computer and peripheral manufactures
• General purpose inverter
• Substitutions for relays and pulse transformers
• Power supply
PIN CONNECTION
(Top View)
PS8802-1
8765
1234
1. NC
2. Anode
3. Cathode
4. NC
5. GND
6. VO
7. NC
8. VCC
PS8802-2
8765
1234
1. Anode1
2. Cathode1
3. Cathode2
4. Anode2
5. GND
6. VO2
7. VO1
8. VCC
Document No. PN10418EJ04V0DS (4th edition)
Date Published November 2004 CP(K)
The mark shows major revised points.
1 page  
PS8802-1,-2
ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Conditions
Diode
Forward Voltage
VF IF = 16 mA
Reverse Current
Forward Voltage
Temperature Coefficient
IR VR = 3 V
∆VF/∆TA IF = 16 mA
Terminal Capacitance
Ct V = 0 V, f = 1 MHz
Detector High Level Output Current IOH (1) IF = 0 mA, VCC = VO = 5.5 V
High Level Output Current IOH (2) IF = 0 mA, VCC = VO = 30 V
Low Level Output Voltage VOL IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA
High Level Supply Current ICCH IF = 0 mA, VO = open, VCC = 30 V
(PS8802-1)
High Level Supply Current
(PS8802-2)
Low Level Supply Current ICCL IF = 16 mA, VO = open, VCC = 30 V
(PS8802-1)
Low Level Supply Current
(PS8802-2)
Coupled Current Transfer Ratio
CTR IF = 16 mA, VCC = 4.5 V, VO = 0.4 V
Input-Output
Isolation Resistance
RI-O VI-O = 1 kVDC, RH = 40 to 60%
Insulation Resistance
RI-I VI-I = 1 kVDC, RH = 40 to 60%
(Input-Input), (PS8802-2)
Input-Output
Isolation Capacitance
CI-O V = 0 V, f = 1 MHz
Insulation Capacitance
(Input-Input), (PS8802-2)
Propagation Delay Time
(H → L)*1
Propagation Delay Time
(L → H)*1
Common Mode
Transient Immunity at
High Level Output*2
Common Mode
Transient Immunity at
Low Level Output*2
CI-I
tPHL IF = 16 mA, VCC = 5 V, RL = 2.2 kΩ,
CL = 15 pF
tPLH
CMH IF = 0 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
CML IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ,
VCM = 1.5 kV
MIN.
15
1011
1010
10
−10
TYP.
1.7
−2.1
30
10
0.1
0.1
MAX.
2.2
10
Unit
V
µA
mV/°C
pF
500 nA
100 µA
0.4 V
2 µA
0.2 4
100
200
25 45 %
Ω
0.6 pF
0.3
0.3 0.8 µs
0.6 1.2
kV/µs
Data Sheet PN10418EJ04V0DS
5
5 Page 
PS8802-1,-2
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C
• Number of reflows
• Flux
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
120±30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180˚C
120˚C
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260˚C MAX.
220˚C
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
Data Sheet PN10418EJ04V0DS
11
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet PS8802-1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS8802-1 | (PS8802-1/-2) 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SOP HIGH-SPEED PHOTOCOUPLER | CEL |
| PS8802-1 | HIGH-SPEED PHOTOCOUPLER |  Renesas |
| PS8802-2 | (PS8802-1/-2) 1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SOP HIGH-SPEED PHOTOCOUPLER | CEL |
| PS8802-2 | HIGH-SPEED PHOTOCOUPLER | Renesas |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |