DataSheet39.com

What is AGN2001H?

This electronic component, produced by the manufacturer "Nais", performs the same function as "ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY".


AGN2001H Datasheet PDF - Nais

Part Number AGN2001H
Description ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY
Manufacturers Nais 
Logo Nais Logo 


There is a preview and AGN2001H download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! AGN2001H datasheet, circuit

www.DataSheet4U.com
GNTESTING
ULTRA-SMALL PACKAGE
GN-RELAYSSLIM POLARIZED RELAY
10.60±0.3
.417±.012
5.70±0.3
.224±.012
9.00±0.3
.354±.012
10.60±0.3
.417±.012
5.70±0.3
.224±.012
Max.10.00
.394
mm inch
FEATURES
• Compact slim body saves space
Thanks to the small surface area of 5.7
mm × 10.6 mm .224 inch × .417 inch and
low height of 9.0 mm .354 inch, the pack-
aging density can be increased to allow
for much smaller designs.
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10×160 µs (FCC part 68)
Surge withstand between contacts and
coil: 2,500 V 2×10 µs (Bellcore)
• The use of twin crossbar contacts en-
sures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating vola-
tile gas from coil.
• Increased packaging density
Due to highly efficient magnetic circuit de-
sign, leakage flux is reduced and changes
in electrical characteristics from compo-
nents being mounted close-together are
minimized. This all means a packaging
density higher than ever before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock re-
sistance.
Functional shock resistance:
750 m/s2 {75G}
Destructive shock resistance:
1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A )
100 m
Contact material
Stationary: AgPd+Au clad
Movable: AgPd
Nominal switching capacity
(resistive load)
1 A 30 V DC
0.3 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 37.5 V A
110 V DC, 125 V AC
Max. switching current
Min. switching capacity f1
1A
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140mW (1.5 to 12 V DC)
230mW (24 V DC)
100mW (1.5 to 12 V DC)
120mW (24 V DC)
Mechanical (at 180 cpm)
5 × 107
Expected
life (min.
operations)
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
0.3 A 125 V AC
resistive
105
105
Remarks:
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 Detection current: 10mA.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10µs.
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Characteristics
Initial insulation resistance*1
Min. 1,000M(at 500V DC)
Initial
breakdown
voltage*2
Between open contacts
Between contact sets
Between contacts and coil
750 Vrms for 1min.
1,000 Vrms for 1min.
1,500 Vrms for 1min.
Initial surge
voltage
Between open contacts
(10×160 µs)
Between contacts and coil
(2×10 µs)
1,500 V (FCC Part 68)
2,500 V (Bellcore)
Operate time [Set time]*3 (at 20°C)
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode)
[Reset time]*3 (at 20°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Temperature rise*4 (at 20°C)
Max. 50°C
Shock resistance
Functional*5
Destructive*6
Min. 750 m/s2{75G]
Min. 1,000 m/s2{100G]
Vibration resistance
Functional*7
Destructive
10 to 55 Hz at double
amplitude of 3.3 mm
10 to 55 Hz at double
amplitude of 5 mm
Conditions for opera- Ambient
tion, transport and temperature f2
storage*8
(Not freezing and con-
densing at low tem- Humidity
perature)
–40°C to 85°C
–40°F to 185°F
5 to 85% R.H.
Unit weight
Approx. 1 g.035 oz
Notes:
f1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
f2 The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70°C –40° to +158°F.
125


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AGN2001H electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AGN2001H.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AGN20012The function is ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY. NaisNais
AGN2001HThe function is GN RELAYS. PanasonicPanasonic
AGN2001HThe function is ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY. NaisNais

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AGN2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search