What is 5B34?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "Isolated Linearized RTD Input".

5B34 Datasheet PDF - Analog Devices

Part Number 5B34
Description Isolated Linearized RTD Input
Manufacturers Analog Devices 
Logo Analog Devices Logo 

There is a preview and 5B34 download ( pdf file ) link at the bottom of this page.

Total 8 Pages

Preview 1 page

No Preview Available ! 5B34 datasheet, circuit
Amplifies, Protects, Filters, and Isolates Analog Input.
Linearize a wide variety of 2 & 3 wire RTDs. (True 4-wire RTD
measurements are provided by the 5B35).
Generates an output of 0 to +5V.
Module circuitry can withstand 240v rms at the input screw-
All 5B34 series modules are mix-and-match and Hot
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
Signal Linearization
The 5B Series represents an innovative generation of low cost,
high performance plug-in signal conditioners. Designed for
industrial applications, these modules incorporate highly
reliable transformer-based isolation and automated surface-
mount manufacturing technology. They are compact,
economical components whose performance exceeds that
available from more expensive devices. Combining 1500 V rms
continuous isolation, +0.05% calibrated accuracy, small size and
low cost, the 5B Series is an attractive alternative to expensive
signal conditioners and in-house designs
All modules are potted and identical in pin-out and size (2.27” x
2.32” x 0.595”). They can be mixed and matched, permitting
users to address their exact needs, and may be “hot swapped
without disturbing field wiring or power. The isolated input
modules provide 0 to +5V or +5V outputs and accept J, K, T, E,
R, S, N, or B type thermocouples.
These modules feature complete signal conditioning functions
including 240 V rms input protection, filtering, chopper
stabilized low drift +1 uV/oC amplification, 1500 V rms
isolation, and sensor excitation when required.
All modules feature excellent common mode rejection and
meet industrial transient surge withstand specifications.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
Isolated Linearized RTD Input
Figure 1. 5B34 Functional Block Diagram
There are also a number of backplanes and mounting sockets
which provide a complete signal conditioning solution for end
users. Each backplane incorporates screw terminals for field
wiring inputs and outputs and cold junction sensors for
thermocouple applications.
These signal conditioners are designed to provide an easy and
convenient solution to signal conditioning problems of both
designers and end users in measurement and control
applications. Typical uses include microcomputer-based
measurement systems, standard data acquisition systems,
programmable controllers, analog recorders and dedicated
control systems. The 5 B series modules are ideally suited to
applications where monitoring and control of temperature,
pressure, flow, rotation and other analog signals are required.
The 5B Series modules and backplanes are approved by Factory
Mutual (FM) and the 5B Series modules are approved by the
Canadian Standards Association (CSA) for use in Class 1,
Division 2, Groups A, B, C, and D locations. These approvals
certify that the 5B Series is suitable for use in locations where a
hazardous concentration of flammable gas may exist only under
fault conditions of operation. Equipment of this category is
called “non-incendive” and they need no special enclosures or
other physical safeguards. The 5B series modules and
backplanes have been tested and passed the stringent heavy
industrial requirements of the EU’s electromagnetic
compatibility (ENC) directive – EN50082-1 and EN50081-2.
When used according to installation directions (refer to 5B
series User Manual), any errors caused by EMI/RFI interference
will be less than 0.1% of the full scale 5B measurement range for
field strengths up to 10 V/M and frequencies up to 1 GHz.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.

5B34 equivalent
Figure 3 5B34 Input Field Connections
Table 1. Pin Function Descriptions—
Pin No. Description
1 NC
2 LO
3 HI
Figure 4 . Model 5B Series Module, with pin-out assignments.
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human
body and test equipment and can discharge without detection. Although this product features proprietary ESD
protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges.
Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. 0 | Page 5 of 8


Preview 5 Page

Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 5B34 electronic component.

Information Total 8 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 5B34.PDF Datasheet ]

Share Link :

Electronic Components Distributor

An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop

Featured Datasheets

Part NumberDescriptionMFRS
5B30The function is (5B30 / 5B31) Millivolt and Voltage Input. Analog DevicesAnalog Devices
5B31The function is (5B30 / 5B31) Millivolt and Voltage Input. Analog DevicesAnalog Devices
5B32The function is Single-Channel Signal Conditioning Module. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  

Quick jump to:

5B34     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    

Privacy Policy   |    Contact Us     |    New    |    Search