DataSheet39.com

What is AD9254?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "14-Bit Analog to Digital Converter".


AD9254 Datasheet PDF - Analog Devices

Part Number AD9254
Description 14-Bit Analog to Digital Converter
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD9254 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! AD9254 datasheet, circuit

www.DataSheet4U.com
FEATURES
1.8 V analog supply operation
1.8 V to 3.3 V output supply
SNR = 71.8 dBc (72.8 dBFS) to 70 MHz input
SFDR = 84 dBc to 70 MHz input
Low power: 430 mW @ 150 MSPS
Differential input with 650 MHz bandwidth
On-chip voltage reference and sample-and-hold amplifier
DNL = ±0.4 LSB
Flexible analog input: 1 V p-p to 2 V p-p range
Offset binary, Gray code, or twos complement data format
Clock duty cycle stabilizer
Data output clock
Serial port control
Built-in selectable digital test pattern generation
Programmable clock and data alignment
APPLICATIONS
Ultrasound equipment
IF sampling in communications receivers
CDMA2000, WCDMA, TD-SCDMA, and WiMax
Battery-powered instruments
Hand-held scopemeters
Low cost digital oscilloscopes
Macro, micro, and pico cell infrastructure
GENERAL DESCRIPTION
The AD9254 is a monolithic, single 1.8 V supply, 14-bit, 150 MSPS
analog-to-digital converter (ADC), featuring a high performance
sample-and-hold amplifier (SHA) and on-chip voltage reference.
The product uses a multistage differential pipeline architecture
with output error correction logic to provide 14-bit accuracy at
150 MSPS data rates and guarantees no missing codes over the
full operating temperature range.
The wide bandwidth, truly differential SHA allows a variety of
user-selectable input ranges and offsets, including single-ended
applications. It is suitable for multiplexed systems that switch
full-scale voltage levels in successive channels and for sampling
single-channel inputs at frequencies well beyond the Nyquist rate.
Combined with power and cost savings over previously available
ADCs, the AD9254 is suitable for applications in communications,
imaging, and medical ultrasound.
A differential clock input controls all internal conversion cycles.
A duty cycle stabilizer (DCS) compensates for wide variations in
the clock duty cycle while maintaining excellent overall ADC
performance.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
14-Bit, 150 MSPS, 1.8 V
Analog-to-Digital Converter
AD9254
VIN+
VIN–
REFT
REFB
VREF
SENSE
FUNCTIONAL BLOCK DIAGRAM
AVDD
DRVDD
AD9254
SHA
MDAC1
8-STAGE
1 1/2-BIT PIPELINE
A/D
4
A/D
8
3
CORRECTION LOGIC
15
OUTPUT BUFFERS
REF
SELECT
0.5V
CLOCK
DUTY CYCLE
STABILIZER
MODE
SELECT
OR
DCO
D13 (MSB)
D0 (LSB)
SCLK/DFS
SDIO/DCS
CSB
AGND
CLK+ CLK–
Figure 1.
PDWN DRGND
The digital output data is presented in offset binary, Gray code, or
twos complement formats. A data output clock (DCO) is provided
to ensure proper latch timing with receiving logic.
The AD9254 is available in a 48-lead LFCSP_VQ and is specified
over the industrial temperature range (−40°C to +85°C).
PRODUCT HIGHLIGHTS
1. The AD9254 operates from a single 1.8 V power supply
and features a separate digital output driver supply to
accommodate 1.8 V to 3.3 V logic families.
2. The patented SHA input maintains excellent performance
for input frequencies up to 225 MHz.
3. The clock DCS maintains overall ADC performance over a
wide range of clock pulse widths.
4. A standard serial port interface supports various product
features and functions, such as data formatting (offset
binary, twos complement, or Gray coding), enabling the
clock DCS, power-down, and voltage reference mode.
5. The AD9254 is pin-compatible with the AD9233, allowing
a simple migration from 12 bits to 14 bits.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.

line_dark_gray
AD9254 equivalent
www.DataSheet4U.com
AD9254
DIGITAL SPECIFICATIONS
AVDD = 1.8 V; DRVDD = 2.5 V, maximum sample rate, 2 V p-p differential input, 1.0 V internal reference; AIN = −1.0 dBFS, DCS enabled,
unless otherwise noted.
Table 3.
Parameter
DIFFERENTIAL CLOCK INPUTS (CLK+, CLK−)
Logic Compliance
Internal Common-Mode Bias
Differential Input Voltage
Input Voltage Range
Input Common-Mode Range
High Level Input Voltage (VIH)
Low Level Input Voltage (VIL)
High Level Input Current (IIH)
Low Level Input Current (IIL)
Input Resistance
Input Capacitance
LOGIC INPUTS (SCLK/DFS, OEB, PWDN)
High Level Input Voltage (VIH)
Low Level Input Voltage (VIL)
High Level Input Current (IIH)
Low Level Input Current (IIL)
Input Resistance
Input Capacitance
LOGIC INPUTS (CSB)
High Level Input Voltage (VIH)
Low Level Input Voltage (VIL)
High Level Input Current (IIH)
Low Level Input Current (IIL)
Input Resistance
Input Capacitance
LOGIC INPUTS (SDIO/DCS)
High Level Input Voltage (VIH)
Low Level Input Voltage (VIL)
High Level Input Current (IIH)
Low Level Input Current (IIL)
Input Resistance
Input Capacitance
DIGITAL OUTPUTS
DRVDD = 3.3 V
High Level Output Voltage (VOH, IOH = 50 μA)
High Level Output Voltage (VOH, IOH = 0.5 mA)
Low Level Output Voltage (VOL, IOL = 1.6 mA)
Low Level Output Voltage (VOL, IOL = 50 μA)
DRVDD = 1.8 V
High Level Output Voltage (VOH, IOH = 50 μA)
High Level Output Voltage (VOH, IOH = 0.5 mA)
Low Level Output Voltage (VOL, IOL = 1.6 mA)
Low Level Output Voltage (VOL, IOL = 50 μA)
Temperature Min
AD9254BCPZ-150
Typ Max
Unit
CMOS/LVDS/LVPECL
Full 1.2
V
Full 0.2
6 V p-p
Full AVDD − 0.3
AVDD + 1.6 V
Full 1.1
AVDD
V
Full 1.2
3.6 V
Full 0
0.8 V
Full −10
+10 μA
Full −10
+10 μA
Full 8 10
12 kΩ
Full 4
pF
Full 1.2
Full 0
Full −50
Full −10
Full 30
Full 2
3.6 V
0.8 V
−75 μA
+10 μA
pF
Full 1.2
Full 0
Full −10
Full +40
Full 26
Full 2
3.6
0.8
+10
+135
V
V
μA
μA
pF
Full 1.2
Full 0
Full −10
Full +40
Full 26
Full 5
DRVDD + 0.3
0.8
+10
+130
V
V
μA
μA
pF
Full 3.29
Full 3.25
Full
Full
Full 1.79
Full 1.75
Full
Full
V
V
0.2 V
0.05 V
V
V
0.2 V
0.05 V
Rev. 0 | Page 5 of 40


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD9254 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AD9254.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD9250The function is Dual Analog-to-Digital Converter. Analog DevicesAnalog Devices
AD9251The function is 1.8 V Dual Analog-to-Digital Converter. Analog DevicesAnalog Devices
AD9252The function is 1.8 V ADC. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD92     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search