DataSheet39.com

What is SY58620L?

This electronic component, produced by the manufacturer "Micrel Semiconductor", performs the same function as "Precision 4.25Gbps CML Backplane Transceiver".


SY58620L Datasheet PDF - Micrel Semiconductor

Part Number SY58620L
Description Precision 4.25Gbps CML Backplane Transceiver
Manufacturers Micrel Semiconductor 
Logo Micrel Semiconductor Logo 


There is a preview and SY58620L download ( pdf file ) link at the bottom of this page.





Total 18 Pages



Preview 1 page

No Preview Available ! SY58620L datasheet, circuit

www.DataSheet4U.com
SY58620L
Precision 4.25Gbps CML Backplane
Transceiver with Integrated Loopback
General Description
The SY58620L is a low jitter, high-speed transceiver
with a variable swing CML transmitter buffer and a CML
high-gain receiver optimized for precision telecom and
enterprise server transmission line and backplane data
management. The SY58620L distributes data to
4.25Gbps guaranteed over temperature and voltage.
The SY58620L transmitter differential input includes
Micrel’s unique, 3-pin input termination architecture that
directly interfaces to any (AC- or DC-coupled)
differential signal as small as 100mV (200mVPP) without
any termination resistor network in the signal path. The
receiver differential input is optimized to interface
directly to AC-coupled signals as small as 10mV
(20mVPP). The outputs are 50source-terminated CML
with extremely fast rise/fall time.
To support remote self-testing, the SY58620L features a
high-speed loopback test mode. The input control signal
LOOPBACK enables an internal loopback path from the
transmitter input to the receiver output.
The SY58620L operates from a 3.3V ±10% supply and
is guaranteed over the full industrial temperature range
of –40°C to +85°C. The SY58620L is part of Micrel’s
high-speed, Precision Edge® product line.
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Applications
Backplane management
Active cable transceivers
SONET/SDH data/clock applications
4X Fibre Channel applications
Typical Applications
Features
Precision Edge®
Guaranteed AC performance over temperature and
voltage:
- Maximum Throughput 4.25Gbps
- <120ps tr/tf time
Transmitter
- Patented input termination directly interfaces to AC-
or DC-coupled differential inputs
- Variable swing CML output
Receiver
- 32dB high-gain Input
- Internal 50input termination
- Accepts AC-coupled input signals as small as 10mV
(20mVPP)
- 400mV (800mVPP) differential CML output swing
Loss-of-Signal (LOS)
- High-gain, TTL-compatible LOS output with internal
4.75kpull-up
- Programmable LOS level set
Ultra-low jitter design
- <5psRMS random jitter
Patent-pending MUX isolates the receiver and the
transmitter channels minimizing on crosstalk
Selectable loopback diagnostic mode
Output enable
Power supply +3.3V ±10%
Industrial temperature range -40°C to +85°C
Available in 24-pin (4mm x 4mm) MLF™
Markets
Precision telecom
Enterprise server
ATE
Test and measurement
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
September 2005
M9999-093005-B
[email protected] or (408) 955-1690

line_dark_gray
SY58620L equivalent
Micrel, Inc.
SY58620L
Outputs
Pin Number
22
19
17, 16
5, 6
8
10
Pin Name
LOS
LOSLVL
RXQ, /RXQ
TXQ, /TXQ
VREF_CTRL
TXVREF-AC
Pin Description
Loss-of-Signal Output. TTL-compatible output with internal 4.75kpull-up resistor. Loss-of-
Signal asserts to logic HIGH when the receiver input amplitudes falls below the threshold set
by LOSLVL.
RX Loss-of-Signal Level Set. A resistor (RLOSLVL) connected between LOSLVL and VCC sets
the threshold for the data input amplitude at which the LOS output is asserted. Default is max
sensitivity. LOSLVL is used to set the Loss-of-Signal (LOS) voltage. It is internally connected
to a 2.8kpull-down resistor to an internal VREF voltage source. See “Typical Operating
Characteristics,” and “Application Implementation” sections for more details.
Receiver Differential Output. Output is CML compatible. Refer to the “Truth Table” and
“Output Stage” sections for more details. Unused output pair may be left open. The output is
designed to drive 400mV (800mVPP) into 50to VCC or 100across the pair.
Transmitter Differential Variable Swing Output. Output is CML compatible. Please refer to the
“Truth Table” and “Output Stage” sections for more details. Unused output pair may be left
open. The output is designed to drive 80mV (160mVPP) min swing to 400mV (800mVPP) typ.
swing into 50to VCC_TXQ or drive 100across the pair depending on TXVCTRL.
Transmitter Output Reference Voltage. Output biases to VCC_TXQ-1.3V. Connecting VREF_CTRL
to TXVCTRL sets the transmitter output swing to max swing.
Transmitter Input Reference Voltage. This output biases to VCC-1.3V. It is used when AC
coupling the transmitter input. For AC-coupled applications, connect TXVREF-AC to the
TXVT pin and bypass with a 0.01µF low ESR capacitors to VCC. See “Input Stage” section for
more details. Maximum sink/source current is ±1.5mA.
Power Pins
Pin Number
3, 24
12, 15, 18
21
4
Pin Name
GND,
Exposed Pad
VCC
VCC_RXIN
VCC_TXQ
Pin Description
Ground. GND pins and exposed pad must be connected to the same ground plane.
3.3V ±10% Positive Power Supply. Bypass with 0.1µF//0.01µF low ESR capacitors and place
as close to each VCC pins as possible. Power pins are not connected internally and must be
connected to the same power supply externally.
3.3V ±10% Receive Input Power Supply. Bypass with 0.1µF//0.01µF low ESR capacitors and
place as close to the VCC_RXIN pin as possible. Power pins are not connected internally and
must be connected to the same power supply externally.
3.3V ±10% Output Transmit Power Supply. Bypass with 0.1µF//0.01µF low ESR capacitors
and place as close to the VCC_TXQ pin as possible. Power pins are not connected internally
and must be connected to the same power supply externally.
Truth Table
LOOPBACK
0
1
RXQ
RXIN
TXIN
TXQ
TXIN
RXIN
September 2005
5 M9999-093005-B
[email protected] or (408) 955-1690


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SY58620L electronic component.


Information Total 18 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SY58620L.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SY58620LThe function is Precision 4.25Gbps CML Backplane Transceiver. Micrel SemiconductorMicrel Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SY58     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search