DataSheet39.com

What is MAX2041?

This electronic component, produced by the manufacturer "Maxim Integrated Products", performs the same function as "Upconversion / Downconversion Mixer".


MAX2041 Datasheet PDF - Maxim Integrated Products

Part Number MAX2041
Description Upconversion / Downconversion Mixer
Manufacturers Maxim Integrated Products 
Logo Maxim Integrated Products Logo 


There is a preview and MAX2041 download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! MAX2041 datasheet, circuit

www.DataSheet4U.com
19-3948; Rev 0; 1/06
EVALUATION
KIT
AVAILABLE
High-Linearity, 1700MHz to 3000MHz Upconversion/
Downconversion Mixer with LO Buffer/Switch
General Description
The MAX2041 high-linearity passive upconverter or
downconverter mixer is designed to provide 7.4dB NF
and a 7.2dB conversion loss for an RF frequency range
of 1700MHz to 3000MHz to support UMTS/WCDMA,
DCS, PCS, and WiMAX base-station transmitter or
receiver applications. The IIP3 is typically +33.5dBm
for both downconversion and upconversion operation.
With an LO frequency range of 1900MHz to 3000MHz,
this particular mixer is ideal for high-side LO injection
architectures. (For a pin-compatible mixer meant for
low-side LO injection, refer to the MAX2039.)
In addition to offering excellent linearity and noise perfor-
mance, the MAX2041 also yields a high level of compo-
nent integration. This device includes a double-balanced
passive mixer core, a dual-input LO selectable switch,
and an LO buffer. On-chip baluns are also integrated to
allow for a single-ended RF input for downconversion (or
RF output for upconversion), and single-ended LO inputs.
The MAX2041 requires a nominal LO drive of 0dBm, and
supply current is guaranteed to be below 145mA.
The MAX2041 is pin compatible with the MAX2031
815MHz to 995MHz mixer, making this family of passive
upconverters and downconverters ideal for applications
where a common PC board layout is used for both fre-
quency bands.
The MAX2041 is available in a compact 20-pin thin
QFN package (5mm x 5mm) with an exposed paddle.
Electrical performance is guaranteed over the extended
-40°C to +85°C temperature range.
Applications
UMTS/WCDMA Base Stations
DCS 1800/PCS 1900 EDGE Base Stations
cdmaOneTM and cdma2000® Base Stations
WiMAX Base Stations and Customer Premise Equipment
PHS/PAS Base Stations
Predistortion Receivers
Fixed Broadband Wireless Access
Wireless Local Loop
Private Mobile Radio
Military Systems
Microwave Links
Digital and Spread-Spectrum Communication Systems
cdmaOne is a trademark of CDMA Development Group.
cdma2000 is a registered trademark of Telecommunications
Industry Association.
Features
o 1700MHz to 3000MHz RF Frequency Range
o 1900MHz to 3000MHz LO Frequency Range
o 1500MHz to 2000MHz LO Frequency Range
(MAX2039)
o DC to 350MHz IF Frequency Range
o 7.2dB Conversion Loss
o +33.5dBm Input IP3
o +23.3dBm Input 1dB Compression Point
o 7.4dB Noise Figure
o Integrated LO Buffer
o Integrated RF and LO Baluns
o Low -3dBm to +3dBm LO Drive
o Built-In SPDT LO Switch with 43dB LO1 to LO2
Isolation and 50ns Switching Time
o Pin Compatible with the MAX2031 815MHz to
995MHz Mixer
o External Current-Setting Resistor Provides Option
for Operating Mixer in Reduced-Power/Reduced-
Performance Mode
o Lead-Free Package Available
Ordering Information
PART
MAX2041ETP
TEMP RANGE PIN-PACKAGE
PKG
CODE
20 Thin QFN-EP*
-40°C to +85°C (5mm x 5mm) T2055-3
bulk
MAX2041ETP-T
20 Thin QFN-EP*
-40°C to +85°C (5mm x 5mm) T2055-3
T/R
MAX2041ETP+
20 Thin QFN-EP*
-40°C to +85°C
(5mm x 5mm)
lead-free
bulk
T2055-3
MAX2041ETP+T
20 Thin QFN-EP*
-40°C to +85°C
(5mm x 5mm)
lead-free
T/R
T2055-3
*EP = Exposed paddle.
T = Tape-and-reel package.
+ = Lead free.
Pin Configuration and Typical Application Circuit appear at
end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing delivery, and ordering information please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

line_dark_gray
MAX2041 equivalent
High-Linearity, 1700MHz to 3000MHz Upconversion/
Downconversion Mixer with LO Buffer/Switch
Typical Operating Characteristics (continued)
(MAX2041 Typical Application Circuit, VCC = +5.0V, PLO = 0dBm, PRF = 0dBm, fLO > fRF , fIF = 200MHz, R1 = 549, unless other-
wise noted.)
Downconverter Curves
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO1 SELECTED)
80
PRF = 0dBm
75 TC = +85°C
70
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO1 SELECTED)
80
75 PLO = 0dBm
PRF = 0dBm
PLO = -3dBm
70
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO1 SELECTED)
80
PRF = 0dBm
75
VCC = 5.25V
70
65 65 65
60 60 60
55
TC = -40°C
TC = +25°C
50
55
50
PLO = +3dBm
55
50
VCC = 4.75V VCC = 5.0V
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO2 SELECTED)
85
PRF = 0dBm
80
75 TC = +85°C
70
65
60
55
TC = -40°C
TC = +25°C
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO2 SELECTED)
85
PRF = 0dBm
80
75 PLO = -3dBm
70
65
60
55 PLO = +3dBm PLO = 0dBm
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
2LO - 2RF RESPONSE vs. RF FREQUENCY
(LO2 SELECTED)
85
VCC = 5.25V PRF = 0dBm
80
75
70
65
60
VCC = 4.75V
55 VCC = 5.0V
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
3LO - 3RF RESPONSE vs. RF FREQUENCY
85
PRF = 0dBm
80 TC = +25°C
75
70
65 TC = -40°C
60 TC = +85°C
55
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
3LO - 3RF RESPONSE vs. RF FREQUENCY
85
PRF = 0dBm
80
75
70
65
60 PLO = -3dBm, 0dBm, +3dBm
55
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
3LO - 3RF RESPONSE vs. RF FREQUENCY
85
PRF = 0dBm
80 VCC = 5.25V
75
70
65 VCC = 5.0V
60 VCC = 4.75V
55
50
45
1500 1700 1900 2100 2300
FUNDAMENTAL RF FREQUENCY (MHz)
_______________________________________________________________________________________ 5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MAX2041 electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ MAX2041.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
MAX204The function is +5V RS-232 Transceivers with 0.1uF External Capacitors. Maxim IntegratedMaxim Integrated
MAX2041The function is Upconversion / Downconversion Mixer. Maxim Integrated ProductsMaxim Integrated Products
MAX2042The function is 2000MHz to 3000MHz Upconversion/Downconversion Mixer. Maxim Integrated ProductsMaxim Integrated Products

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

MAX2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search