DataSheet39.com

What is ISL54050?

This electronic component, produced by the manufacturer "Intersil Corporation", performs the same function as "Ultra Low ON-Resistance Dual SDPT Analog Switch".


ISL54050 Datasheet PDF - Intersil Corporation

Part Number ISL54050
Description Ultra Low ON-Resistance Dual SDPT Analog Switch
Manufacturers Intersil Corporation 
Logo Intersil Corporation Logo 


There is a preview and ISL54050 download ( pdf file ) link at the bottom of this page.





Total 12 Pages



Preview 1 page

No Preview Available ! ISL54050 datasheet, circuit

www.DataSheet4U.com
®
Data Sheet
September 1, 2006
ISL54050
FN6356.0
Ultra Low ON-Resistance, +1.65V to +4.5V,
Single Supply, Dual SPDT Analog Switch
The Intersil ISL54050 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
analog switch designed to operate from a single +1.65V to
+4.5V supply. Targeted applications include battery powered
equipment that benefit from low RON (0.29Ω) and fast
switching speeds (tON = 40ns, tOFF = 20ns). The digital logic
input is 1.8V logic-compatible when using a single +3V supply.
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL54050 is offered in small form factor package, alleviating
board space limitations.
The ISL54050 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches. This configuration can be
used as a dual 2-to-1 multiplexer. The ISL54050 is pin
compatible with the NLAS5223 and NLAS5223L.
TABLE 1. FEATURES AT A GLANCE
ISL54050
Number of Switches
2
SW
4.3V RON
4.3V tON/tOFF
3V RON
3V tON/tOFF
1.8V RON
1.8V tON/tOFF
Package
SPDT or 2-1 MUX
0.29
40ns/20ns
0.33
50ns/27ns
0.55
70ns/54ns
10 Ld 1.8x1.4x0.5mm µTQFN
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
Features
• Pb-Free (RoHS Compliant)
• Pin Compatible Replacement for the NLAS5223 and
NLAS5223L
• ON Resistance (RON)
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.29
- V+ = +3.0V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.33
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.55
• RON Matching Between Channels . . . . . . . . . . . . . . . . 0.06
• RON Flatness Across Signal Range . . . . . . . . . . . . . . . 0.03
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (PD). . . . . . . . . . . . . . . <0.45µW
• Fast Switching Action (V+ = +4.3V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>8kV
• Break-before-Make
• 1.8V Logic Compatible (+3V supply)
• Low ICC Current when VinH is not at the V+ Rail
• Available in 10 Ld 1.8x1.4x0.5mm µTQFN
Applications
• Battery powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and Video Switching
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

line_dark_gray
ISL54050 equivalent
www.DataSheet4U.com
ISL54050
Electrical Specifications - 3V Supply
Test Conditions: V+ = +2.7V to +3.3V, GND = 0V, VINH = 1.4V, VINL = 0.5V (Note 4),
unless otherwise specified (Continued)
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C) MIN TYP MAX UNITS
OFF Isolation
RL = 50, CL = 5pF, f = 100kHz, VCOM = 1VRMS,
(See Figure 4)
25
62 dB
Crosstalk (Channel-to-Channel)
RL = 50, CL = 5pF, f = 100kHz, VCOM = 1VRMS,
(See Figure 6)
25
-85 dB
Total Harmonic Distortion
f = 20Hz to 20kHz, VCOM = 2VP-P, RL = 600
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
V+ = +3.6V, VIN = 0V or V+
25
25
25
25
Full
0.005
65
181
0.01
0.52
%
pF
pF
µA
µA
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 3.3V, VIN = 0V or V+
25
25 1.4
Full -0.5
0.5 V
V
0.5 µA
Electrical Specifications - 1.8V Supply
Test Conditions: V+ = +1.65V to +2V, GND = 0V, VINH = 1.0V, VINL = 0.4V (Note 4),
unless otherwise specified
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C) MIN TYP MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
ON Resistance, RON
V+ = 1.65V, ICOM = 100mA, VNO or VNC = 0V to V+,
(See Figure 5)
Full
25
Full
0
V+ V
0.7 0.8
0.85
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 1.65V, VNO or VNC = 1.0V, RL =50, CL = 35pF, 25
70 ns
(See Figure 1)
Full 80 ns
Turn-OFF Time, tOFF
V+ = 1.65V, VNO or VNC = 1.0V, RL =50, CL = 35pF, 25
54 ns
(See Figure 1)
Full 65 ns
Break-Before-Make Time Delay, tD V+ = 2.0V, VNO or VNC = 1.0V, RL =50, CL = 35pF,
Full
10
ns
(See Figure 3)
Charge Injection, Q
CL = 1.0nF, VG = 0V, RG = 0Ω, (See Figure 2)
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
DIGITAL INPUT CHARACTERISTICS
25
25
25
42 pC
70 pF
186 pF
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 2.0V, VIN = 0V or V+
25
25 1.0
Full -0.5
0.4 V
V
0.5 µA
5 FN6356.0
September 1, 2006


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ISL54050 electronic component.


Information Total 12 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ISL54050.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ISL54050The function is Ultra Low ON-Resistance Dual SDPT Analog Switch. Intersil CorporationIntersil Corporation
ISL54051The function is (ISL54051 / ISL54052) Single SPST Analog Switches. Intersil CorporationIntersil Corporation
ISL54052The function is (ISL54051 / ISL54052) Single SPST Analog Switches. Intersil CorporationIntersil Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ISL5     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search