DataSheet39.com

What is ADCMP600?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "(ADCMP600 - ADCMP602) Single-Supply TTL/CMOS Comparator".


ADCMP600 Datasheet PDF - Analog Devices

Part Number ADCMP600
Description (ADCMP600 - ADCMP602) Single-Supply TTL/CMOS Comparator
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and ADCMP600 download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! ADCMP600 datasheet, circuit

www.DataSheet4U.com
Preliminary Technical Data
Rail-to-Rail, Very Fast, 2.5 V to 5.5 V,
Single-Supply TTL/CMOS Comparators
ADCMP600/ADCMP601/ADCMP602
FEATURES
10 mV sensitivity rail to rail at VCC = 2.5 V
Input common-mode voltage from −0.2 V to VCC + 0.2 V
Low glitch CMOS-/TTL-compatible output stage
3 ns propagation delay
15 mW at 3.3 V
Shutdown pin
Single-pin control for programmable hysteresis and latch
Power supply rejection > 60 dB
Improved replacement for MAX999
−40°C to +125°C operation
APPLICATIONS
High speed instrumentation
Clock and data signal restoration
Logic level shifting or translation
Pulse spectroscopy
High speed line receivers
Threshold detection
Peak and zero-crossing detectors
High speed trigger circuitry
Pulse-width modulators
Current-/voltage-controlled oscillators
Automatic test equipment (ATE)
GENERAL DESCRIPTION
The ADCMP600, ADCMP601, and ADCMP602 are very fast
comparators fabricated on Analog Devices’ proprietary XFCB2
process. These comparators are exceptionally versatile and easy
to use. Features include an input range from VEE − 0.5 V to VCC +
0.5 V, low noise TTL-/CMOS-compatible output drivers, and
latch inputs with adjustable hysteresis and/or shutdown inputs.
The devices offer 3 ns propagation delay with 5 mV overdrive
on 4 mA typical supply current.
A flexible power supply scheme allows the devices to operate
with a single +2.5 V positive supply and a −0.5 V to +3.0 V
input signal range up to a +5.5 V positive supply with a −0.5 V
to +6 V input signal range. Split input/output supplies with no
sequencing restrictions on the ADCMP602 support a wide
FUNCTIONAL BLOCK DIAGRAM
NONINVERTING
INPUT
INVERTING
INPUT
ADCMP600/
ADCMP601/
ADCMP602
Q OUTPUT
LE/HYS
(Except ADCMP600)
SDN
(ADCMP602 Only)
Figure 1.
input signal range while still allowing independent output
swing control and power savings.
The TTL-/CMOS-compatible output stage is designed to drive
up to 5 pF with full timing specs and to degrade in a graceful
and linear fashion as additional capacitance is added. The
comparator input stage offers robust protection against large
input overdrive, and the outputs do not phase reverse when the
valid input signal range is exceeded. High speed latch and
programmable hysteresis features are also provided with a
unique single-pin control option.
The ADCMP600 is available in both 5-lead SC70 and SOT-23
packages, the ADCMP601 is available in a 6-lead SC70 package,
and the ADCMP602 is available in 8-lead MSOP and LSCFP
packages.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.

line_dark_gray
ADCMP600 equivalent
www.DataSheet4U.com
Preliminary Technical Data
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltages
Input Supply Voltage (VCCI to GND)
Output Supply Voltage
(VCCO to GND)
Positive Supply Differential
(VCCI − VCCO)
Input Voltages
Input Voltage
Differential Input Voltage
Maximum Input/Output Current
Shutdown Control Pin
Applied Voltage (HYS to GND)
Maximum Input/Output Current
Latch/Hysteresis Control Pin
Applied Voltage (HYS to GND)
Maximum Input/Output Current
Output Current
Temperature
Operating Temperature, Ambient
Operating Temperature, Junction
Storage Temperature Range
Rating
−0.5 V to +6.0 V
−0.5 V to +6.0 V
−6.0 V to +6.0 V
−0.5 V to VCCI + 0.5 V
±(VCCI + 0.5 V)
±50 mA
−0.5 V to VCCO + 0.5 V
±50 mA
−0.5 V to VCCO + 0.5 V
±50 mA
±50 mA
−40°C to +125°C
150°C
−65°C to +150°C
ADCMP600/ADCMP601/ADCMP602
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
JA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3. Thermal Resistance
Package Type
ADCMP600 SC70 5-lead
ADCMP600 SOT-23 5-lead
ADCMP601 SC70 6-lead
ADCMP602 MSOP 5-lead
θJA1 Unit
426 °C/W
302 °C/W
426 °C/W
130 °C/W
1 Measurement in still air.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. PrA | Page 5 of 16


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ADCMP600 electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ADCMP600.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ADCMP600The function is (ADCMP600 - ADCMP602) Single-Supply TTL/CMOS Comparator. Analog DevicesAnalog Devices
ADCMP601The function is (ADCMP600 - ADCMP602) Single-Supply TTL/CMOS Comparator. Analog DevicesAnalog Devices
ADCMP602The function is (ADCMP600 - ADCMP602) Single-Supply TTL/CMOS Comparator. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ADCM     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search