DataSheet39.com

What is AD71056?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "Energy Metering IC".


AD71056 Datasheet PDF - Analog Devices

Part Number AD71056
Description Energy Metering IC
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD71056 download ( pdf file ) link at the bottom of this page.





Total 20 Pages



Preview 1 page

No Preview Available ! AD71056 datasheet, circuit

www.DataSheet4U.com
Energy Metering IC with Integrated
Oscillator and Reverse Polarity Indication
AD71056
FEATURES
On-chip oscillator as clock source
High accuracy, supports 50 Hz/60 Hz IEC62053-21
Less than 0.1% error over a dynamic range of 500 to 1
Supplies average real power on frequency outputs (F1, F2)
High frequency output (CF) calibrates and supplies
instantaneous real power
Logic output (REVP) indicates potential miswiring or
negative power
Direct drive for electromechanical counters and 2-phase
stepper motors (F1, F2)
Proprietary ADCs and DSP provide high accuracy over large
variations in environmental conditions and time
On-chip power supply monitoring
On-chip creep protection (no load threshold)
On-chip reference 2.45 V (20 ppm/°C typical) with external
overdrive capability
Single 5 V supply, low power (20 mW typical)
Low cost CMOS process
GENERAL DESCRIPTION
The AD710561 is a high accuracy, electrical energy metering IC
with a precise oscillator circuit that serves as a clock source to
the chip. The AD71056 eliminates the need for an external
crystal or resonator, thus reducing the overall cost of building a
meter with this IC. The chip directly interfaces with the shunt
resistor.
The AD71056 specifications surpass the accuracy requirements
as quoted in the IEC62053-21 standard.
The only analog circuitry used in the AD71056 is in the Σ-Δ
ADCs and reference circuit. All other signal processing, such as
multiplication and filtering, is carried out in the digital domain.
This approach provides superior stability and accuracy over
time and in extreme environmental conditions.
The AD71056 supplies average real power information on F1
and F2, the low frequency outputs. These outputs either directly
drive an electromechanical counter or interface with an MCU.
The high frequency CF logic output, ideal for calibration
purposes, provides instantaneous real power information.
The AD71056 includes a power supply monitoring circuit on
the VDD supply pin. The AD71056 remains inactive until the
supply voltage on VDD reaches approximately 4 V. If the supply
falls below 4 V, the AD71056 also remains inactive and the F1,
F2, and CF outputs are in their nonactive modes.
Internal phase matching circuitry ensures that the voltage and
current channels are phase matched, and the HPF in the current
channel eliminates dc offsets. An internal no load threshold
ensures that the AD71056 does not exhibit creep when no load
is present.
The part is available in a 16-lead, narrow body SOIC package.
V2P 2
V2N 3
V1N 4
V1P 5
FUNCTIONAL BLOCK DIAGRAM
VDD
1
AGND
6
POWER
SUPPLY MONITOR
+ Σ-Δ ...110101...
ADC
AD71056
DGND
13
MULTIPLIER
SIGNAL
PROCESSING
BLOCK
+
2.5V
REFERENCE
Σ-Δ
ADC
4k
...11011001...
PHASE
CORRECTION
Ф
HPF
LPF
INTERNAL
OSCILLATOR
DIGITAL-TO-FREQUENCY
CONVERTER
7
REFIN/OUT
11
RCLKIN
8 10 9 12 14 16 15
SCF S0 S1 REVP CF F1 F2
Figure 1.
1 U.S. Patents 5,745,323; 5,760,617; 5,862,069; 5,872,469; others pending.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.

line_dark_gray
AD71056 equivalent
AD71056
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to AGND
VDD to DGND
Analog Input Voltage to AGND
V1P, V1N, V2P, and V2N
Reference Input Voltage to AGND
Digital Input Voltage to DGND
Digital Output Voltage to DGND
Operating Temperature Range
Storage Temperature Range
Junction Temperature
16-Lead Plastic SOIC, Power Dissipation
θJA Thermal Impedance1
Package Temperature Soldering
Rating
−0.3 V to +7 V
−0.3 V to +7 V
−6 V to +6 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
−40°C to +85°C
−65°C to +150°C
150°C
350 mW
124.9°C/W
See J-STD-20
1 JEDEC 1S standard (2-layer) board data.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. A | Page 5 of 20


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD71056 electronic component.


Information Total 20 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AD71056.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD71056The function is Energy Metering IC. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD71     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search