|
|
PDF ERJ-12ZYxxxx Data sheet ( Hoja de datos )
| Número de pieza | ERJ-12ZYxxxx | |
| Descripción | (ERJ-Series) Thick Film Chip Resistors | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ERJ-12ZYxxxx (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
.comThick Film Chip Resistors
U0201, 0402, 0603, 0805, 1206,
t41210, 1812, 2010, 2512
heeType: ERJ 1G, 2G, 3G, 6G, 8G, 14,
S12, 12Z, 1T
www.Datan Features
Thick Film Chip Resistors
l Small size and lightweight
For PCB size reduction and lightweight products
ml High reliability
Metal glaze thick film resistive element and three layers of electrodes result in high reliability
ol Matching with placement machine
Taping and bulk case packagings for automatic placement machine
.cl Solderability
Suitable for both reflow soldering and flow soldering
l Reference Standards
UIEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
t4n Explanation of Part Numbers
eel ERJ1GE, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Series, ±5 % type
h1 2 3 4 5 6 7 8 9 10 11 12
SE R J 3 G E Y J 1 0 2 V
taProduct Code
aThick Film
www.DChip Resistors
Size, Power Rating
Type : inches
Power R.
1GE : 0201
0.05 W
2GE : 0402
0.063 W
3GE : 0603
0.1 W
6GE : 0805
0.125 W
8GE : 1206
0.25 W
14 : 1210
0.25 W
12 : 1812
0.5 W
12Z : 2010
0.5 W
1T : 2512
1W
Code
Y
] Nil
Marking
Marking
Value Marking on
black side
No marking
Resistance Tolerance
Code
Tolerance
J ± 5%
0 Jumper
Resistance Value
The first two digits are significant figures of resistance and
the third one denotes number of zeros following.
Decimal Point is expressed by R as 4.7 = 4R7.
Jumper is expressed by R00.
Packaging Methods
Code
Packaging
Pressed Carrier Taping
C 2 mm pitch, 15000 pcs.
(Only 1GE type)
Punched Carrier Taping
X 2 mm pitch, 10000 pcs.
(Only 2GE type)
V
Punched Carrier Taping
(Only 3GE, 6GE, 8GE type)
Embossed CarrierTaping
U (Only 14, 12, 12Z, 1T type)
Bulk case
B (Only 2GE, 3GE type)
] When omitted, all the rest P/N factors shall be moved up respectively.
(Only 1GE, 2GE type and Bulk case)
w.DataSheet4U.comDesign and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or us
wwShould a safety concern arise regarding this product, please be sure to contact us immediately.
e.
1 page  
Caution for Safety
(Common precautions for Fixed Resistors)
¥ When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
¥ Do not use the products beyond the specifications described in this catalog.
¥ This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
¥ Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
] Systems equipped with a protection circuit and a protection device
] Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
¥ These products are designed and manufactured for general purpose and standard use in general electronic
equip ment (e.g. AV equipment, home electric appliances, office equipment, information and communication
equipment)
¥ These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. In an environment where strong static electricity or electromagnetic waves exist
5. In an environment where these products cause dew condensation
6. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
¥ These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
¥ Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products .
¥ Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
perfor mance or reliability of the products.
¥ Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival
at your company, provided that they remain packed as they were when delivered and stored at a temperature
of 5 ¡C to 35 ¡C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
– ER3 –
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet ERJ-12ZYxxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ERJ-12ZYxxxx | (ERJ-Series) Thick Film Chip Resistors | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |