What is DEH-X7550SD?

This electronic component, produced by the manufacturer "Pioneer", performs the same function as "CD RDS RECEIVER Manual".

DEH-X7550SD Datasheet PDF - Pioneer

Part Number DEH-X7550SD
Description CD RDS RECEIVER Manual
Manufacturers Pioneer 
Logo Pioneer Logo 

There is a preview and DEH-X7550SD download ( pdf file ) link at the bottom of this page.

Total 30 Pages

Preview 1 page

No Preview Available ! DEH-X7550SD datasheet, circuit

RDS ﻮﻳﺩﺍﺭ ﻊﻣ CD ﺕﺎﻧﺍﻮﻄﺳﺍ ﻞﻐﺸﻣ
CD RDS ﻩﺪﻧﺮﯿﮔ ﻩﺎﺘﺳﺩ
Owners Manual
Manual de instrucciones
Manual do Proprietário
ﻚﻟﺎﻤﻟﺍ ﻞﻴﻟﺩ
ﺮﺑﺭﺎﮐ ﯼﺎﻤﻨﻫﺍﺭ ﻪﺮﺘﻓﺩ

DEH-X7550SD equivalent
Using this unit
Using this unit
Use and care of the remote
Using the remote control
1 Point the remote control in the direction of the
front panel to operate.
When using for the first time, pull out the film
protruding from the tray.
Replacing the battery
1 Slide the tray out on the back of the remote
2 Insert the battery with the plus (+) and minus
() poles aligned properly.
! When disposing of used batteries, comply
with governmental regulations or environ-
mental public institutionsrules that apply in
your country/area.
! Do not store the remote control in high tem-
peratures or direct sunlight.
! The remote control may not function properly
in direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under
the brake or accelerator pedal.
Frequently used menu
! Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
! Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
! Use one CR2025 (3 V) lithium battery.
! Remove the battery if the remote control is
not used for a month or longer.
! There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
! Do not handle the battery with metallic tools.
! Do not store the battery with metallic ob-
! If the battery leaks, wipe the remote control
completely clean and install a new battery.
Returning to the previous display
Returning to the previous list/category (the folder/
category one level higher)
1 Press /DISP.
Returning to the ordinary display
1 Press BAND/ .
Returning to the ordinary display from the list/cat-
1 Press BAND/ .
Selecting a function or list
1 Turn M.C. or LEVER.
! In this manual, Turn used to describe
the operation used to select a function or list.
Basic operations
1 234 5 6 7
1 234 5 6
Non-RDS or AM
1 Band indicator
2 News indicator
3 Traffic Announce indicator
4 5 (stereo) indicator
5 Preset number indicator
6 LOC indicator
Appears when local seek tuning is on.
7 Signal level indicator
8 TEXT indicator
Shows when the radio text is received.
9 PTY label indicator
a Program service name
b Frequency indicator
Selecting a band
1 Press BAND/ until the desired band (FM-1,
FM-2,FM-3 for FM or AM) is displayed.
Manual tuning (step by step)
1 Turn LEVER.
! Select Manual (manual tuning) under Tuning
Mode to use this function. For details about
the settings, refer to Tuning Mode (LEVER tun-
ing setting) on page 7.
Switching preset stations
1 Turn LEVER.
! Select Preset (preset channel) under Tuning
Mode to use this function. For details about
the settings, refer to Tuning Mode (LEVER tun-
ing setting) on page 7.
1 Turn and hold down LEVER.
! While turning and holding down LEVER,
you can skip stations. Seek tuning starts
as soon as you release LEVER.
Using PI Seek
If the tuner cannot find a suitable station, or the
reception status deteriorates, the unit automati-
cally searches for a different station with the
same programming. During the search, PI SEEK
is displayed and the sound is muted.
Using Auto PI Seek for preset
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during preset
! The default setting for Auto PI Seek is off.
Refer to Auto PI (auto PI seek) on page 16.
En 5


Preview 5 Page

Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DEH-X7550SD electronic component.

Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ DEH-X7550SD.PDF Datasheet ]

Share Link :

Electronic Components Distributor

An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop

Featured Datasheets

Part NumberDescriptionMFRS
DEH-X7550SDThe function is CD RDS RECEIVER Manual. PioneerPioneer

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  

Quick jump to:

DEH-     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    

Privacy Policy   |    Contact Us     |    New    |    Search