S5L5025X04-Q0 PDF Datasheet

DVD PLAYER DIGITAL SERVO & DSP IC S5L1454A INTRODUCTION KS1454 is a DVDP (Digital Video Disc Player) 1-chip LSI which includes the digital servo and DSP(Digital Signal Processor) features. Servo Block performs the digital servo function, which controls disc speed and pick-up location as it retrieves signals from the disc (CD,VCD,DVD). Servo block contains the wide capture PLL

RF SIGNAL PROCESSOR S5L1462B INTRODUCTION 80-QFP-1420C The S5L1462B01 is used for CD and DVD playback. It receives optical signal from the optical pick-up to produce the data-generating RF signal, the servo error signal for stable servo control, and the monitor signal. This RF IC can be used in the CD 1x, 2x, or the DVD 1x CLV (Constant Linear Velocity) mode. The DVD mode is

RF SIGNAL PROCESSOR S5L1462B INTRODUCTION 80-QFP-1420C The S5L1462B01 is used for CD and DVD playback. It receives optical signal from the optical pick-up to produce the data-generating RF signal, the servo error signal for stable servo control, and the monitor signal. This RF IC can be used in the CD 1x, 2x, or the DVD 1x CLV (Constant Linear Velocity) mode. The DVD mode is

CPAD-WALTZ(S5L840F) Internet Audio Decoder for Flash Memory Media Data Sheet INTRODUCTION S5L840F is a single chip digital audio player IC supporting various compressed audio format on Flash Memory Media. S5L840F provides 2Mbits of embedded NOR flash memory and 76Kbytes of SRAM requiring no external memory. A 16bit RISC processor (CALMRISC16TM) and 24bit MAC(MAC2424 TM) are pr

DATA SHEET S5L9250B INTRODUCTION The CD-ROM 48X 1 chip receives the input signal read from the CD-DA/VIDEO-CD/CD-ROM disc after handling by the RF amplifier. The signal is input into the digital servo block which has a built-in DSP core, and goes through focus and tracking adjustments. The RF signal input into a data path goes through the data slicer, PLL, EFM demodulator, C1

DATA SHEET S5L9250B INTRODUCTION The CD-ROM 48X 1 chip receives the input signal read from the CD-DA/VIDEO-CD/CD-ROM disc after handling by the RF amplifier. The signal is input into the digital servo block which has a built-in DSP core, and goes through focus and tracking adjustments. The RF signal input into a data path goes through the data slicer, PLL, EFM demodulator, C1