|
|
Datasheet AH49E Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | AH49E | LINEAR HALL-EFFECT IC Preliminary Datasheet LINEAR HALL-EFFECT IC General Description
The AH49E is a small, versatile linear Hall-effect device that is operated by the magnetic field from a permanent magnet or an electromagnet. The output voltage is set by the supply voltage and varies in proportion to the strength of th |  BCD | data |
AH4 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | AH4 | High Dynamic Range Amplifier
High Dynamic Range Amplifier
AH4
The Communications Edge ™
Product Features • 250-6000 MHz • +41 dBm Output IP3 • 2.7 dB Noise Figure • 13.5 dB Gain • +21 dBm P1dB • MTBF >100 Years • 3 X 3 LGA SMT Package • Single +5 Bias Supply
Actual Size
Product Descrip  WJ Communications amplifier | | |
| 2 | AH41 | BIPOLAR HALL-EFFECT POSITION SENSORS Data Sheet
BIPOLAR HALL-EFFECT POSITION SENSORS
AH41
General Description
The AH41 is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that ampli BCD sensor | | |
| 3 | AH420 | 4W High Linearity InGaP HBT Amplifier
AH420
• 400 – 2700 MHz • +35.7 dBm P1dB
4W High Linearity InGaP HBT Amplifier
Product Features
Product Description
The AH420 is a high dynamic range amplifier in a low-cost surface mount package. The InGaP/GaAs HBT is able to achieve high performance with -49 dBc ACLR a  TriQuint Semiconductor amplifier | | |
| 4 | AH477 | SINGLE PHASE HALL EFFECT LATCH Product Brief SINGLE PHASE HALL EFFECT LATCH Description
The AH477 is an integrated Hall sensor with output driver designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier that amplifies the Hall voltage, a BCD latch | | |
| 5 | AH477A | SINGLE PHASE HALL EFFECT LATCH Data Sheet SINGLE PHASE HALL EFFECT LATCH General Description
The AH477A is an integrated Hall sensor with Hbridged output driver designed for brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier that amplifies the Hall voltage, a comparator  BCD Semiconductor latch | | |
| 6 | AH478 | SINGLE PHASE HALL EFFECT LATCH Data Sheet SINGLE PHASE HALL EFFECT LATCH WITH LOCKED PROTECTION General Description
The AH478 is a single coil Hall sensor with output drivers designed for brush-less DC motor application. This IC consists of one H-bridge driver for motor's coil driving and has automatic lock shutdown and restart f BCD Semiconductor latch | | |
| 7 | AH496B | LINEAR HALL-EFFECT SENSOR NANJING AH ELECTRONICS CO., LTD
AH496B，AH3503
SERIES LINEAR HALL-EFFECT SENSORS
These Hall-effect sensors accurately track extremely small changes in magnetic flux density—changes generally too small to operate Hall-effect switches. As motion detectors, gear tooth sensors, and proximity detector  NANJING AH ELECTRONICS sensor | |
| Esta página es del resultado de búsqueda del AH49E. Si pulsa el resultado de búsqueda de AH49E se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |