|
|
PDF CP1002 Data sheet ( Hoja de datos )
| Número de pieza | CP1002 | |
| Descripción | SINGLE-PHASE SILICON BRIDGE | |
| Fabricantes | Pan Jit International Inc. | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CP1002 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
CP1000 THRU CP1008
SINGLE-PHASE SILICON BRIDGE
VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 10A
FEATURES
l Surge overload rating—200 Amperes peak
l Low forward voltage drop and reverse leakage
l Small size, simple installation
l Plastic package has Underwriter Laboratory
Flammability Classification 94V-O
l Reliable low cost construction utilizing molded
plastic technique
CP-10
MECHANICAL DATA
Case: Molded plastic with heatsink integrally
mounted in the bridge encapsulation
Terminals: Leads solderable per MIL-STD-202,
Method 208
Weight: 0.21 ounce, 6.1 grams
MACXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
At 25 ¢J ambient temperature unless otherwise noted; resistive or inductive load at 60Hz .
Max Recurrent Peak Rev Voltage
Max Bridge Input Voltage RMS
Max Average Rectified Output at TC=50 ¢J *
See Fig. 2
at TC=100 ¢J *
at TA=50 ¢J **
Peak One Cycle Surge Overload Current
Max Forward Voltage Drop per element at
5.0A DC & 25 ¢J . See Fig. 3
Max Rev Leakage at rated Dc Blocking
Voltage per element at 25 ¢J
See Fig 4
at100 ¢J
Typical junction capacitance per leg (Note 4) CJ
I2t Rating for fusing ( t<8.3ms)
Typical Thermal Resistance (Note 2) R £KJA
Typical Thermal Resistance (Note 3) R £KJC
Operating Temperature Range
Storage Temperature Range
CP1000
50
35
CP1001
100
70
CP1002 CP1004
200 400
140 280
10.0
3.0
3.0
200
1.1
10.0
1.0
200
164
25
5
-55 TO +125
-55 TO +150
CP1006
600
420
CP1008 UNITS
800 V
560 V
A
A
A
V
£g A
mA
PF
A2S
¢J /W
¢J
¢J
NOTES:
* Unit mounted on metal chassis.
** Unit mounted on P.C. board.
1. Recommended mounting position is to bolt down on heatsink with silicone thermal compound
for maximum heat transfer with #6 screw.
2. Units Mounted in free air, no heatsink. P.C.B at 0.375”(9.5mm) lead length with 0.5 ¡Ñ 0.5”
(12 ¡Ñ 12mm)copper pads.
3. Units Mounted on a 3.0 ¡Ñ 3.0” ¡Ñ 0.11” thick (7.5 ¡Ñ 7.5 ¡Ñ 0.3cm) AL plate heatsink.
4. Measured at 1.0MHZ and applied reverse voltage of 4.0 volts.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet CP1002.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CP100 | PNP Silicon Planar Transistor |  CDIL |
| CP1000 | SINGLE-PHASE SILICON BRIDGE(VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A/ HEAT-SINK MTG 10A) | Pan Jit International Inc. |
| CP1000 | SINGLE-PHASE SILICON BRIDGE |  TRSYS |
| CP1001 | SINGLE-PHASE SILICON BRIDGE(VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A/ HEAT-SINK MTG 10A) | Pan Jit International Inc. |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |