VLA315H-24100A Datasheet PDF - Isahaya Electronics
| Part Number | VLA315H-24100A | |
| Description | ISOLATED TYPE DC-DC CONVERTER | |
| Manufacturers | Isahaya Electronics | |
| Logo |  |
|
|
There is a preview and VLA315H-24100A download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
DESCRIPTION
The VLA315H-24100A is an isolated DC-DC converter designed
to control the industrial equipment. It can input DC1000Vmax
directly and convert to low voltage.
Total output power is 100W.
FEATURES
•Wide input voltage----- 400V to 1000V DC
•Output
----------- +24V, 4.2A (100.8W)
•Electrical isolation (between input and output)
------------- 2500Vrms 1 minute
•Over current protection (auto resumption)
APPLICATIONS
On-board pre-regulator for industrial control equipment
BLOCK DIAGRAM
HYBRID IC
VLA315H-24100A
ISOLATED TYPE DC-DC CONVERTER
|
| |
 
HYBRID IC
VLA315H-24100A
ISOLATED TYPE DC-DC CONVERTER
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1) Don’t stack boxes too high. Avoid placing heavy materials on boxes.
2) Boxes must be positioned correctly during transportation to avoid breakage.
3) Don't throw or drop boxes.
4) Keep boxes dry. Avoid rain or snow.
5) Minimal vibration and shock during transportation is desirable.
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
To prevent any electrical damages, use Hics within the maximum ratings. The temperature,
current, voltage, etc. must not exceed these conditions.
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for VLA315H-24100A electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ VLA315H-24100A.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| VLA315H-24100A | The function is ISOLATED TYPE DC-DC CONVERTER. Isahaya Electronics | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
VLA3
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||