|
|
Número de pieza | CA24D12-40 | |
Descripción | DC/DC converter | |
Fabricantes | WALL | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CA24D12-40 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! CA SERIES
25 TO 40 WATTS
25 TO 40 WATTS - CA SERIES
Ultra Wide Input Voltage Range, Low Profile
F E AT U R E S
• Ultra-Wide Input Voltage Range (4:1)
• LC Input Filter for Low Reflected Ripple Current
• Regulated Outputs
• Thermal Shutdown with Auto-Recovery
• Current Limiting Short Circuit Protection
• 500VDC min. I/O Isolation
• Industry Standard Package and Pin-Out
• Industrial temperature grade also available
THE CA SERIES FROM WALL INDUSTRIES
The CA Series of single, dual and triple output DC/DC con-
verters performs over an ultra-wide input voltage range (4:1),
providing indefinite short circuit and overvoltage protection.
Without a heatsink, the CA Series’ design technology allows
for up to 40 watts output power from a 3.0 x 3.0 x 0.40”
case. These current mode control forward converters are
designed for improved transient response and reduced
stress on switching components.
SPECIFICATIONS: CA SERIES
All specifications apply @ +25 C ambient unless otherwise
noted.
INPUT SPECIFICATIONS
Input Voltages......................4.5-9,9-36, 18-75, 55-110VDC
Nominal Input...........................................5, 24, 48, 74VDC
Input Filter......................................................LC input filter
Remote On/Off Control........................Open Collector TTL
OUTPUT SPECIFICATIONS
Output Current......................................................see table
Voltage Tolerance....................±1% primary, ±2% auxiliary
Output Trim (external).........................±10% (primary only)
Line Regulation...........................................................0.5%
Load Regulation..........................±1% singles (see note 5)
Ripple/Noise (20MHz BW)..................................75mV p-p
Transient Response............<200u sec to within ±1% Vout
GENERAL SPECIFICATIONS
Efficiency...........................................................80% typical
.............5VDC in................................................75% typical
Isolation Voltage (input to output)...................500VDC min.
Isolation Resistance (input to output)...............500MOhms
Switching Frequency...................................250kHz(typical)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (ambient).......-25 to 85%°C (case)
Storage Temperature.....................................-55 to +100°C
Temperature Coefficient.........................0.02% per °C max.
Humidity (non-condensing).......................20% to 95% R.H.
PHYSICAL SPECIFICATIONS
Shielding...............................................................Six-sided
Weight..........................................................approx. 4.0 oz.
Case Material.......................................Black coated metal,
...................................................non-conductive base plate
Due to advances in technology, specifications subject to
change without notice.
1
603 778 2300
W W W.WALLINDUSTRIES.C O M
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet CA24D12-40.PDF ] |
Número de pieza | Descripción | Fabricantes |
CA24D12-40 | DC/DC converter | WALL |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |