RFM96W Datasheet PDF - HOPERF
Part Number | RFM96W | |
Description | Low Power Long Range Transceiver Module | |
Manufacturers | HOPERF | |
Logo | ||
There is a preview and RFM96W download ( pdf file ) link at the bottom of this page. Total 30 Pages |
Preview 1 page No Preview Available ! RFM95/96/97/98(W)
RFM95/96/97/98(W) - Low Power Long Range Transceiver Module V1.0
GENERAL DESCRIPTION
The RFM95/96/97/98(W) transceivers feature the
LoRaTM long range modem that provides ultra-long range
spread spectrum communication and high interference
immunity whilst minimising current consumption.
Using Hope RF’s patented LoRaTM modulation technique
RFM95/96/97/98(W) can achieve a sensitivity of over -
148dBm using a low cost crystal and bill of materials. The
high sensitivity combined with the integrated +20 dBm
power amplifier yields industry leading link budget
making it optimal for any application requiring range or
robustness. LoRaTM also provides significant advantages in
both blocking and selectivity over conventional modulation
techniques, solving the traditional design compromise
between range, interference immunity and energy
consumption.
These devices also support high performance (G)FSK
modes for systems including WMBus, IEEE802.15.4g. The
RFM95/96/97/98(W) deliver exceptional phase noise,
selectivity, receiver linearity and IIP3 for significantly
lower current consumption than competing devices.
KEY PRODUCT FEATURES
LoRaTM Modem.
168 dB maximum link budget.
+20 dBm - 100 mW constant RF output vs. V supply.
+14 dBm high efficiency PA.
Programmable bit rate up to 300 kbps.
High sensitivity: down to -148 dBm.
Bullet-proof front end: IIP3 = -12.5 dBm.
Excellent blocking immunity.
Low RX current of 10.3 mA, 200 nA register retention.
Fully integrated synthesizer with a resolution of 61 Hz.
FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
Built-in bit synchronizer for clock recovery.
Preamble detection.
127 dB Dynamic Range RSSI.
Automatic RF Sense and CAD with ultra-fast AFC.
Packet engine up to 256 bytes with CRC.
Built-in temperature sensor and low battery indicator.
Modue Size:16*16mm
RFM95/96/97/98(W)
APPLICATIONS
Automated Meter Reading.
Home and Building Automation.
Wireless Alarm and Security Systems.
Industrial Monitoring and Control
Long range Irrigation Systems
Page 1
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http:/ / www.hoperf.com
|
|
Section
RFM95/96/97/98(W)
Page
Table 1. RFM95/96/97/98(W) Device Variants and Key Parameters .............................................................................10
Table 2. Absolute Maximum Ratings .............................................................................................................................12
Table 3. Operating Range .............................................................................................................................................12
Table 4. Power Consumption Specification ...................................................................................................................13
Table 5. Frequency Synthesizer Specification ..............................................................................................................13
Table 6. FSK/OOK Receiver Specification ....................................................................................................................14
Table 7. Transmitter Specification .................................................................................................................................15
Table 8. LoRa Receiver Specification. ..........................................................................................................................17
Table 9. Digital Specification .........................................................................................................................................19
Table 10. Example LoRaTM Modem Performances .....................................................................................................22
Table 11. Range of Spreading Factors ..........................................................................................................................24
Table 12. Cyclic Coding Overhead ................................................................................................................................24
Table 13. LoRaTM Operating Mode Functionality .........................................................................................................31
Table 14. LoRa CAD Consumption Figures ..................................................................................................................40
Table 15. DIO Mapping LoRaTM Mode .........................................................................................................................41
Table 16. Bit Rate Examples .........................................................................................................................................42
Table 17. Preamble Detector Settings ...........................................................................................................................48
Table 18. RxTrigger Settings to Enable Timeout Interrupts ..........................................................................................49
Table 19. Basic Transceiver Modes ..............................................................................................................................50
Table 20. Receiver Startup Time Summary ..................................................................................................................51
Table 21. Receiver Startup Options ..............................................................................................................................54
Table 22. Sequencer States ..........................................................................................................................................55
Table 23. Sequencer Transition Options .......................................................................................................................56
Table 24. Sequencer Timer Settings .............................................................................................................................58
Table 25. Status of FIFO when Switching Between Different Modes of the Chip .........................................................62
Table 26. DIO Mapping, Continuous Mode ...................................................................................................................64
Table 27. DIO Mapping, Packet Mode ..........................................................................................................................64
Table 28. CRC Description ...........................................................................................................................................72
Table 29. Power Amplifier Mode Selection Truth Table ................................................................................................78
Table 30. High Power Settings ......................................................................................................................................79
Table 31. Operating Range, +20dBm Operation ...........................................................................................................79
Table 32. Operating Range, +20dBm Operation ...........................................................................................................79
Table 33. Trimming of the OCP Current ........................................................................................................................80
Table 34. LNA Gain Control and Performances ............................................................................................................81
Table 35. RssiSmoothing Options .................................................................................................................................82
Table 36. Available RxBw Settings ................................................................................................................................82
Table 37. Registers Summary .......................................................................................................................................84
Table 38. Register Map .................................................................................................................................................87
Table 39. Low Frequency Additional Registers ...........................................................................................................100
Page 5
Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http:/ / www.hoperf.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RFM96W electronic component. |
Information | Total 30 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ RFM96W.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
RFM96 | The function is (RFM95 - RFM98) Low Power Long Range Transceiver Module. HOPERF | |
RFM96W | The function is Low Power Long Range Transceiver Module. HOPERF | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RFM9
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |