|
|
PDF AIS3624DQ Data sheet ( Hoja de datos )
| Número de pieza | AIS3624DQ | |
| Descripción | High-performance motion sensor | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AIS3624DQ (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
AIS3624DQ
High-performance motion sensor for automotive applications:
ultra-low-power digital output 3-axis accelerometer
Datasheet - production data
QFN 24 (4x4x1.8 mm3)
Features
Wide supply voltage range: 2.4 V to 3.6 V
1.8 V low voltage compatible IOs
Ultra-low-power mode consumption
down to 10 μA
6g/±12g/24g dynamically selectable full
scale
SPI/I2C digital output interface
16-bit data output, 12-bit resolution
2 independent programmable interrupt
generators
System sleep-to-wake function
Embedded self-test
Extended temperature range -40°C to 105°C
10000 g high shock survivability
ECOPACK®, RoHS and “Green” compliant
(see Section 8)
AEC-Q100 qualification
Description
The AIS3624DQ is an ultra-low-power high-
performance three-axis accelerometer with a
digital serial interface SPI standard output, an I2C
compatible interface is also available.
The device features ultra-low-power operational
modes that allow advanced power saving and
smart sleep-to-wake functions.
The AIS3624DQ has dynamically user selectable
full scales of ±6g/±12g/±24g and it is capable of
measuring accelerations with output data rates
from 0.5 Hz to 1 kHz.
The self-test capability allows the user to check
the functioning of the sensor in the final
application.
The device may be configured to generate an
interrupt signal by inertial wakeup/free-fall events
as well as by the position of the device itself.
Thresholds and timing of interrupt generators are
programmable by the end user on the fly.
The AIS3624DQ is available in small, quad flat
no-lead package (QFN) with the reduced 4x4 mm
footprint required by many applications and it is
guaranteed to operate over an extended
temperature range from -40 °C to +105 °C.
This product may be used in a variety of
automotive non-safety applications such as:
Motion-activated functions
Telematic boxes
Impact recognition and logging systems
Vibration monitoring and compensation
Order codes
AIS3624DQ
AIS3624DQTR
Table 1. Device summary
Temperature range [C]
Package
-40 to +105
QFN 4x4x1.8 24L
-40 to +105
QFN 4x4x1.8 24L
Packaging
Tray
Tape and reel
December 2015
This is information on a product in full production.
DocID027117 Rev 2
1/41
www.st.com
1 page  
AIS3624DQ
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Table 20.
Table 21.
Table 22.
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 30.
Table 31.
Table 32.
Table 33.
Table 34.
Table 35.
Table 36.
Table 37.
Table 38.
Table 39.
Table 40.
Table 41.
Table 42.
Table 43.
Table 44.
Table 45.
Table 46.
Table 47.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Mechanical characteristics @ Vdd = 3.3 V, T = -40 °C to +105 °C
unless otherwise noted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electrical characteristics @ Vdd = 3.3 V, T = -40 °C to +105 °C unless otherwise noted . 11
SPI slave timing values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
I2C slave timing values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Serial interface pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
I2C terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SAD+Read/Write patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transfer when master is writing one byte to slave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transfer when master is writing multiple bytes to slave:. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transfer when master is receiving (reading) one byte of data from slave: . . . . . . . . . . . . . 20
Transfer when master is receiving (reading) multiple bytes of data from slave . . . . . . . . . 20
Register address map. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WHO_AM_I register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CTRL_REG1 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CTRL_REG1 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Power mode and low-power output data rate configurations . . . . . . . . . . . . . . . . . . . . . . . 26
Normal-mode output data rate configurations and low-pass cutoff frequencies . . . . . . . . . 26
CTRL_REG2 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
CTRL_REG2 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
High-pass filter mode configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
High-pass filter cutoff frequency configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CTRL_REG3 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CTRL_REG3 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Data signal on INT 1 and INT 2 pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CTRL_REG4 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CTRL_REG4 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CTRL_REG5 register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CTRL_REG5 description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Sleep-to-wake configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
REFERENCE register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
REFERENCE description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
STATUS_REG register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
STATUS_REG description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
INT1_CFG register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
INT1_CFG description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Interrupt 1 source configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
INT1_SRC register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
INT1_SRC description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
INT1_THS register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
INT1_THS description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
INT1_DURATION register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
INT2_DURATION description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
INT2_CFG register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
INT2_CFG description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DocID027117 Rev 2
5/41
41
5 Page 
AIS3624DQ
Mechanical and electrical specifications
2.2 Electrical characteristics
Table 4. Electrical characteristics @ Vdd = 3.3 V, T = -40 °C to +105 °C unless otherwise noted (1)
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Vdd
Vdd_IO
Idd
IddLP
IddPdn
VIH
VIL
VOH
VOL
ODR
Supply voltage
I/O pins supply voltage(2)
2.4
1.8
Current consumption
in normal mode
2.4 V to 3.6 V
200
Current consumption
in low-power mode
ODR=1 Hz, BW=500 Hz,
T=25°C
8
Current consumption in
power-down mode
0.1
Digital high-level input
voltage
0.8*Vdd_IO
Digital low-level input voltage
High-level output voltage
0.9*Vdd_IO
Low-level output voltage
DR bit set to 00
Output data rate
in normal mode
DR bit set to 01
DR bit set to 10
DR bit set to 11
PM bit set to 010
3.3
10
1
50
100
400
1000
0.5
3.6
Vdd+0.1
450
12
2
0.2*Vdd_IO
0.1*Vdd_IO
V
V
μA
μA
μA
V
V
V
V
Hz
ODRLP
Output data rate
in low-power mode
BW System bandwidth
Ton Turn-on time(3)
PM bit set to 011
PM bit set to 100
PM bit set to 101
PM bit set to 110
ODR = 100 Hz
Top Operating temperature range
1
2
5
10
ODR/2
0.9/ODR+ 1/ODR+ 1.1/ODR+
1 ms
1 ms
1 ms
-40 +105
Hz
Hz
s
°C
1. The product is factory calibrated at 3.3 V. Operational power supply (Vdd) over 3.6 V is not recommended.
2. It is possible to remove Vdd maintaining Vdd_IO without blocking the communication busses, in this condition the
measurement chain is powered off.
3. Time to obtain valid data after exiting power-down mode
DocID027117 Rev 2
11/41
41
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet AIS3624DQ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AIS3624DQ | High-performance motion sensor | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |