DataSheet39.com

What is 74HC377?

This electronic component, produced by the manufacturer "NXP Semiconductors", performs the same function as "Octal D-type flip-flop".


74HC377 Datasheet PDF - NXP Semiconductors

Part Number 74HC377
Description Octal D-type flip-flop
Manufacturers NXP Semiconductors 
Logo NXP Semiconductors Logo 


There is a preview and 74HC377 download ( pdf file ) link at the bottom of this page.





Total 19 Pages



Preview 1 page

No Preview Available ! 74HC377 datasheet, circuit

74HC377; 74HCT377
Octal D-type flip-flop with data enable; positive-edge trigger
Rev. 3 — 25 September 2013
Product data sheet
1. General description
The 74HC377; 74HCT377 is an octal positive-edge triggered D-type flip-flop. The device
features clock (CP) and data enable (E) inputs. When E is LOW, the outputs Qn assume
the state of their corresponding Dn inputs that meet the set-up and hold time requirements
on the LOW-to-HIGH clock (CP) transition. Input E must be stable one set-up time prior to
the LOW-to-HIGH transition for predictable operation. Inputs include clamp diodes that
enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Common clock and master reset
Eight positive edge-triggered D-type flip-flops
Complies with JEDEC standard no. 7A
Input levels:
For 74HC377: CMOS level
For 74HCT377: TTL level
ESD protection:
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V.
Multiple package options
Specified from 40 C to +85 C and from 40 C to +125 C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description
74HC377N 40 C to +85 C DIP20 plastic dual in-line package; 20 leads (300 mil)
74HCT377N
74HC377D 40 C to +85 C SO20
plastic small outline package; 20 leads; body width 7.5 mm
74HCT377D
74HC377DB 40 C to +85 C
74HCT377DB
SSOP20 plastic shrink small outline package; 20 leads; body width
5.3 mm
74HC377PW 40 C to +85 C
74HCT377PW
TSSOP20 plastic thin shrink small outline package; 20 leads; body
width 4.4 mm
Version
SOT146-1
SOT163-1
SOT339-1
SOT360-1

line_dark_gray
74HC377 equivalent
NXP Semiconductors
74HC377; 74HCT377
Octal D-type flip-flop with data enable; positive-edge trigger
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
Min Max Unit
VCC
IIK
IOK
IO
ICC
IGND
Tstg
Ptot
supply voltage
input clamping current
output clamping current
output current
supply current
ground current
storage temperature
total power dissipation
VI < 0.5 V or VI > VCC + 0.5 V
VO < 0.5 V or VO > VCC + 0.5 V
0.5 V < VO < VCC + 0.5 V
Tamb = 40 C to +125 C
DIP20 package
0.5
[1] -
[1] -
-
-
50
65
[2] -
+7
20
20
25
50
-
+150
750
V
mA
mA
mA
mA
mA
C
mW
SO20, SSOP20, TSSOP20
[3] -
500 mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For DIP20 package: above 70 C the value of Ptot derates linearly with 12 mW/K.
[3] For SO20 package: above 70 C the value of Ptot derates linearly with 8 mW/K.
For SSOP20 and TSSOP20 packages: above 60 C the value of Ptot derates linearly with 5.5 mW/K.
8. Recommended operating conditions
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
VCC
VI
VO
Tamb
t/V
supply voltage
input voltage
output voltage
ambient temperature
input transition rise and fall rate
VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
74HC377
Min Typ Max
2.0 5.0 6.0
0 - VCC
0 - VCC
40 - +125
- - 625
- 1.67 139
- - 83
74HCT377
Min Typ Max
4.5 5.0 5.5
0 - VCC
0 - VCC
40 - +125
---
- 1.67 139
---
Unit
V
V
V
C
ns/V
ns/V
ns/V
74HC_HCT377
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 25 September 2013
© NXP B.V. 2013. All rights reserved.
5 of 19


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 74HC377 electronic component.


Information Total 19 Pages
Link URL [ Copy URL to Clipboard ]
Download [ 74HC377.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
74HC373The function is Octal D-type transparent latch 3-state. PhilipsPhilips
74HC373The function is Octal D-type transparent latch. NXP SemiconductorsNXP Semiconductors
74HC374The function is Octal D-type flip-flop positive edge-trigger 3-state. PhilipsPhilips

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

74HC     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search