DataSheet39.com

What is AT5160?

This electronic component, produced by the manufacturer "Global Mixed-mode Technology", performs the same function as "Constant Current 40V White-LEDs Driver".


AT5160 Datasheet PDF - Global Mixed-mode Technology

Part Number AT5160
Description Constant Current 40V White-LEDs Driver
Manufacturers Global Mixed-mode Technology 
Logo Global Mixed-mode Technology Logo 


There is a preview and AT5160 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! AT5160 datasheet, circuit

Global Mixed-mode Technology
AT5160
High Efficiency, Constant Current 40V White-LEDs
Driver
Feature
„ Operating Voltage: 2.5V to 5.5V.
„ High Operating Frequency: 1MHz
„ High Output Voltage: Up to 40V(Typ.)
„ Digital Dimming Control.
„ Built-in Cycle-by Cycle Current-Limiting.
„ Built-in Soft-Start Function.
„ 0.2V Low Reference Voltage
„ Thermal Overload Protection
„ TSOT-23-6 Package
Application
„ GPS Navigation System
„ Compact Back Light Module
„ Constant Current Source
„ LED Module
Description
The AT5160 step-up converter drives white LEDs with a
constant current to provide backlight in cell phones,
PDAs, and other hand-held devices. It features allowing
series connection of the white LEDs so that the LED
currents are identical for uniform brightness. An enable
input can be pulsed repeatedly to adjust LED’s
brightness. The fast 1.0MHz current-mode PWM control
allows for smaller capacitor and inductor. Fault condition
protection uses cycle-by-cycle current limiting to sense
maximum inductor current, thermal protection and
over-voltage protection. Also included soft-start eliminates
inrush current during start-up. The 0.2V low reference
voltage minimized the power loss across the
current-setting resistor.
The AT5160 is available in TSOT-23-6 packages.
Ordering Information
ORDER
NUMBER
AT5160TP1U
Note: TP: TSOT-23-6
1: Bonding Code
U: Tape & Reel
MARKING
5160x
Pin Configuration
TEMP.
RANGE
-40°C to 85°C
PACKAGE
(Green)
TSOT-23-6
Typical Application Circuit
Use the tantalum capacitor to eliminate inductor noise on
output terminal when you want to control dimming function.
LX 1
AT5160
6 VIN
GND 2
5 OVP
FB 3
TSOT-23-6
4 EN
Ver: 0.4
Jan 17, 2013
TEL: 886-3-5788833
http://www.gmt.com.tw
1


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AT5160 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AT5160.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AT5160The function is Constant Current 40V White-LEDs Driver. Global Mixed-mode TechnologyGlobal Mixed-mode Technology

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AT51     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search