|
|
Número de pieza | NB7VQ14M | |
Descripción | 1.8V/2.5V/3.3V 8GHz / 14Gbps Differential 1:4 Clock / Data CML Fanout Buffer | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NB7VQ14M (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! NB7VQ14M
1.8V/2.5V/3.3V 8GHz /
14Gbps Differential 1:4
Clock / Data CML Fanout
Buffer w/ Selectable Input
Equalizer
Multi−Level Inputs w/ Internal Termination
Description
The NB7VQ14M is a high performance differential 1:4 CML fanout
buffer with a selectable Equalizer receiver. When placed in series with
a Clock /Data path operating up to 8 GHz or 14 Gb/s, respectively, the
NB7VQ14M inputs will compensate the degraded signal transmitted
across a FR4 PCB backplane or cable interconnect and output four
identical CML copies of the input signal with a 1.8 V, 2.5 V or 3.3 V
power supply. Therefore, the serial data rate is increased by reducing
Inter−Symbol Interference (ISI) caused by losses in copper
interconnect or long cables. The EQualizer ENable pin (EQEN)
allows the IN/IN inputs to either flow through or bypass the Equalizer
section. Control of the Equalizer function is realized by setting EQEN;
When EQEN is set Low, the IN/IN inputs bypass the Equalizer. When
EQEN is set High, the IN/IN inputs flow through the Equalizer. The
default state at start−up is LOW. As such, NB7VQ14M is ideal for
SONET, GigE, Fiber Channel, Backplane and other Clock/Data
distribution applications.
The differential inputs incorporate internal 50 W termination
resistors that are accessed through the VT pin. This feature allows the
NB7VQ14M to accept various logic level standards, such as LVPECL,
CML or LVDS. The 1:4 fanout design was optimized for low output
skew applications.
The NB7VQ14M is a member of the GigaComm™ family of high
performance clock products.
Features
• Input Data Rate > 14 Gb/s, Typical
• Input Clock Frequency > 8 GHz, Typical
• 165 ps Typical Propagation Delay
• 30 ps Typical Rise and Fall Times
• < 15 ps Maximum Output Skew
• < 0.8 ps Maximum RMS Clock Jitter
• < 10 ps pp of Data Dependent Jitter
• Differential CML Outputs, 400 mV Peak−to−Peak, Typical
• Selectable Input Equalization
• Operating Range: VCC = 1.71 V to 3.6 V with GND = 0 V
• Internal Input Termination Resistors, 50 W
• −40°C to +85°C Ambient Operating Temperature
• These are Pb−Free Devices
http://onsemi.com
1
QFN−16
MN SUFFIX
CASE 485G
MARKING
DIAGRAM*
16
1
NB7V
Q14M
ALYWG
G
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
*For additional marking information, refer to
Application Note AND8002/D.
SIMPLIFIED BLOCK DIAGRAM
EQ
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2010
December, 2010 − Rev. 0
1
Publication Order Number:
NB7VQ14M/D
1 page NB7VQ14M
Table 5. DC CHARACTERISTICS, MULTI−LEVEL INPUTS VCC = 1.71 V to 3.6 V; GND = 0 V;
TA = −40°C to 85°C (Note 5)
Symbol
Characteristic
Min Typ Max Unit
POWER SUPPLY CURRENT
VCC Power Supply Voltage
VCC = 3.3 V
3.135
3.3
3.6 V
VCC = 2.5 V
2.375
2.5
2.625
VCC = 1.8 V
1.71
1.8
1.89
ICC Power Supply Current (Inputs and Outputs Open)
170 210 mA
CML OUTPUTS (Note 6)
VOH Output HIGH Voltage
VCC = 3.3 V
VCC = 2.5 V
VCC = 1.8 V
VOL Output LOW Voltage
VCC = 3.3 V
VCC = 2.5 V
VCC = 1.8 V
DIFFERENTIAL INPUT DRIVEN SINGLE−ENDED (see Figures 5 and 7) (Note 7)
VCC – 30
3270
2470
1770
VCC – 525
2775
1975
1275
VCC – 5
3295
2495
1795
VCC – 425
2875
2075
1375
VCC
3300
2500
1800
VCC – 325
2975
2175
1475
mV
mV
VIH
VIL
Vth
VISE
VREFAC
Single−ended Input HIGH Voltage
Single−ended Input LOW Voltage
Input Threshold Reference Voltage Range (Note 8)
Single−ended Input Voltage Amplitude (VIH − VIL)
Vth + 100
GND
1050
200
VCC
Vth −100
VCC − 100
2800
mV
mV
mV
mV
VREFAC
Output Reference Voltage @ 100 mA for capacitor* coupled inputs,
only (Note 9)
VCC = 3.3 V
VCC = 2.5 V
VCC = 1.8 V
VCC – 650
2650
1850
1150
DIFFERENTIAL INPUTS DRIVEN DIFFERENTIALLY (see Figures 6 and 8) (Note 9)
VCC – 500
2800
2000
1300
VCC – 350
2950
2150
1450
mV
VIHD
VILD
VID
VCMR
Differential Input HIGH Voltage
Differential Input LOW Voltage
Differential Input Voltage (VIHD − VILD)
Input Common Mode Range (Differential Configuration) (Note 10)
(Figure 9)
1200
0
100
1050
VCC
VIHD − 100
1200
VCC − 50
mV
mV
mV
mV
IIH Input HIGH Current IN / IN, (VT Open)
IIL Input LOW Current IN / IN, (VT Open)
CONTROL INPUTS (EQEN)
−150
−150
150 mA
150 mA
VIH Input HIGH Voltage for Control Pins
VIL Input LOW Voltage for Control Pins
IIH Input HIGH Current
IIL Input LOW Current
TERMINATION RESISTORS
VCC x 0.65
GND
−150
−150
VCC
VCC x 0.35
150
150
V
V
mA
mA
RTIN
RTOUT
Internal Input Termination Resistor
Internal Output Termination Resistor
45 50 55 W
45 50 55 W
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
5. Input and output parameters vary 1:1 with VCC.
6. CML outputs loaded with 50 W to VCC for proper operation.
7. Vth, VIH, VIL,, and VISE parameters must be complied with simultaneously.
8. Vth is applied to the complementary input when operating in single−ended mode.
9. VIHD, VILD, VID and VCMR parameters must be complied with simultaneously.
10. VCMR min varies 1:1 with GND, VCMR max varies 1:1 with VCC. The VCMR range is referenced to the crosspoint side of the differential input
signal.
http://onsemi.com
5
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet NB7VQ14M.PDF ] |
Número de pieza | Descripción | Fabricantes |
NB7VQ14M | 1.8V/2.5V/3.3V 8GHz / 14Gbps Differential 1:4 Clock / Data CML Fanout Buffer | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |