|
|
PDF NSSU100CT Data sheet ( Hoja de datos )
| Número de pieza | NSSU100CT | |
| Descripción | UV LED | |
| Fabricantes | NICHIA | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NSSU100CT (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
NICHIA STS-DA1-1793 <Cat.No.110530>
NICHIA CORPORATION SPECIFICATIONS FOR UV LED
NSSU100CT
● Pb-free Reflow Soldering Application
● Built-in ESD Protection Device
● RoHS Compliant
1 page  
SOLDERING
NICHIA STS-DA1-1793 <Cat.No.110530>
• Recommended Reflow Soldering Condition(Lead-free Solder)
1 to 5°C per sec
Pre-heat
180 to 200°C
60sec Max
Above 220°C
260°C Max
10sec Max
• Recommended Manual Soldering Condition
Temperature
350°C Max
Soldering Time
3sec Max
120sec Max
● Recommended Soldering Pad Pattern
1.5
4.4 (単位 Unit: mm)
* The product is designed to be reflow soldered to a PCB. If you use dip soldering for the products,
Nichia cannot guarantee its reliability.
* Reflow soldering must not be performed more than twice. Manual soldering must only be done once.
* Care should be taken to avoid cooling at a rapid rate and ensure the peak temperature ramps down slowly.
* Customer is advised to use nitrogen reflow soldering as air flow process can cause optical degradation
due to the heat and atmosphere of reflow soldering.
* Since silicone used as encapsulating resin in this product is a soft material, do not press on the encapsulant.
Failure to comply might lead to nicks, chip-outs, delamination and deformation of the encapsulant, wire breakage
and an adverse effect on product reliability.
* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used.
It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
* When soldering, avoid applying any stress to the LED package while heated.
4
5 Page 
NICHIA STS-DA1-1793 <Cat.No.110530>
FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS
* 本特性は参考です。
All characteristics shown are for reference only and are not guaranteed.
NSSU 100C
管理番号 No. STS-DA7-1148
順電 圧-順電流 特性
Forward Voltage vs
Forward Current
100
80
VfIf
T A=25 °C
周囲温 度-順電 圧特性
Ambient Temperature vs
Forward Voltage
4.5
TaVf
IFP=5 mA
IFP=2 0mA
IFP=6 0mA
4.0
20
10 3.5
3.0
1
2.5
3.0 3.5 4.0
順電圧
Forward Voltage(V)
4.5
2.5
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature(°C)
順電 流-相対放 射束 特性
Forward Current vs
Relative Radiant Flu x
5
IfIv
T A=25 °C
周囲温 度-相対 放射束 特性
Ambient Temperature vs
Relative Radiant Flux
1.4
TaIv
IFP= 20mA
4
3
2
1
0
0
20 40 60 80
順電流
Forward Current(mA)
100
1.2
1.0
0.8
0.6
-60 -40 -20 0 20 40 60 80 100 120
周囲温度
Ambient Temperature(°C)
10
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet NSSU100CT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NSSU100CT | UV LED | NICHIA |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |