DataSheet39.com

What is AD5823?

This electronic component, produced by the manufacturer "Analog Devices", performs the same function as "10-Bit VCM Driver".


AD5823 Datasheet PDF - Analog Devices

Part Number AD5823
Description 10-Bit VCM Driver
Manufacturers Analog Devices 
Logo Analog Devices Logo 


There is a preview and AD5823 download ( pdf file ) link at the bottom of this page.





Total 22 Pages



Preview 1 page

No Preview Available ! AD5823 datasheet, circuit

ADI Confidential
10-Bit VCM Driver for Autofocus
AD5823/AD5823-1
FEATURES
10-bit VCM driver for autofocus
ARC and ESRC enabled for fast autofocus capture
Available in 2 × 3 array, 1.1 mm2 WLCSP
2-wire (I2C-compatible), 1.8 V serial interface
10-bit resolution DAC
100 mA output current sink
Integrated current sense resistor
2.3 V to 3.6 V power supply
Guaranteed monotonic over all codes
Power-down to 5 µA maximum
Internal reference
Ultralow noise preamplifier
Power-on reset
APPLICATIONS
Camera phones
Camera/image modules
Lens autofocus
Shutter/NDF/iris control
Camera enabled PDA
Web cameras
GENERAL DESCRIPTION
The AD58231 and AD5823-1 are single, 10-bit DACs with 100 mA
output current sink capability and integrated Actuator Response
Control™ (ARC™) technology. ARC is a revolutionary autofocus
capture time and image quality enhancing technology developed by
Analog Devices, Inc., and integrated into the AD5823/AD5823-1
VCM drivers.
ARC circuitry applies specialized, patented waveform and appli-
cation technology to underdamped voice coil motors (VCMs)
to reduce mechanical ringing. This technology enables the user
to achieve very fast mechanical settling times and, as a result,
greatly enhances autofocus capture times, image quality, and
user experience.
The AD5823/AD5823-1 feature an internal reference and
operate from a single 2.3 V to 3.6 V supply. The DAC is
controlled via a 2-wire (I2C-compatible) serial interface that
operates at clock rates up to 400 kHz. The 7-bit I2C address
for the AD5823/AD5823-1 is 0xC.
FUNCTIONAL BLOCK DIAGRAM
VDD
SDA
SCL
SHUTDOWN
REFERENCE
POR
10-BIT
DAC
ARC
MCLK
DIGITAL
INTERFACE
RSENSE
0.5
D1
ISINK
Figure 1.
GND
The AD5823/AD5823-1 also incorporate a power-on reset
circuit, which ensures that the DAC output powers up to 0 V
and remains at 0 V until a valid write takes place. To ensure that
minimal power is consumed in shutdown mode, the user can
select the power-down polarity: the AD5823 SHUTDOWN pin
is active low; the AD5823-1 SHUTDOWN pin is active high.
The AD5823/AD5823-1 were designed for autofocus applica-
tions in camera modules, camera phones, digital still cameras,
and camcorders.
The AD5823/AD5823-1 have many industrial applications, such
as controlling temperature, light, and movement over the
temperature range of −40°C to +85°C without derating.
1 Protected by U.S. Patent 5,969,657; other patents pending.
Rev. Sp0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesfor itsuse, norfor any infringementsof patentsorother
rightsofthirdpartiesthatmayresultfrom itsuse.Specificationssubjecttochange withoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are the property of their respectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.

line_dark_gray
AD5823 equivalent
ADI Confidential
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
VDD to GND
Digital Inputs
ISINK to GND
Operating Temperature Range
Storage Temperature Range
Junction Temperature
Rating
−0.3 V to +4.2 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
−40°C to +85°C
−65°C to +150°C
125°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
AD5823/AD5823-1
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 5. Thermal Resistance
Package Type
WLCSP (CB-6-11)
θJA
1601
1 For an S2P2 board.
Unit
°C/W
ESD CAUTION
Rev. Sp0 | Page 5 of 22


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AD5823 electronic component.


Information Total 22 Pages
Link URL [ Copy URL to Clipboard ]
Download [ AD5823.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
AD582The function is Low Cost Sample/Hold Amplifier. Analog DevicesAnalog Devices
AD5821The function is single 10-bit digital-to-analog converter. Analog DevicesAnalog Devices
AD5821AThe function is I2C DAC. Analog DevicesAnalog Devices

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

AD58     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search