DataSheet39.com

What is SAMD21E?

This electronic component, produced by the manufacturer "ATMEL Corporation", performs the same function as "SMART ARM-Based Microcontroller".


SAMD21E Datasheet PDF - ATMEL Corporation

Part Number SAMD21E
Description SMART ARM-Based Microcontroller
Manufacturers ATMEL Corporation 
Logo ATMEL Corporation Logo 


There is a preview and SAMD21E download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! SAMD21E datasheet, circuit

SMART
Atmel SAM D21E / SAM D21G / SAM D21J
SMART ARM-Based Microcontroller
DATASHEET
Description
The Atmel® | SMARTSAM D21 is a series of low-power microcontrollers using the 32-bit
ARM® Cortex®-M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and
32KB of SRAM. The SAM D21 devices operate at a maximum frequency of 48MHz and reach
2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical
peripheral modules, hex compatible code, identical linear address map and pin compatible
migration paths between all devices in the product series. All devices include intelligent and
flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive
touch button, slider and wheel user interfaces.
The Atmel SAM D21 devices provide the following features: In-system programmable Flash,
twelve-channel direct memory access (DMA) controller, 12 channel Event System,
programmable interrupt controller, up to 52 programmable I/O pins, 32-bit real-time clock and
calendar, up to five 16-bit Timer/Counters (TC) and three 24-bit Timer/Counters for Control
(TCC), where each TC can be configured to perform frequency and waveform generation,
accurate program execution timing or input capture with time and frequency measurement of
digital signals. The TCs can operate in 8- or 16-bit mode, selected TCs can be cascaded to form
a 32-bit TC, and three timer/counters have extended functions optimized for motor, lighting and
other control applications. The series provide one full-speed USB 2.0 embedded host and device
interface; up to six Serial Communication Modules (SERCOM) that each can be configured to act
as an USART, UART, SPI, I2C up to 3.4MHz, SMBus, PMBus, and LIN slave; two-channel I2S
interface; up to twenty-channel 350ksps 12-bit ADC with programmable gain and optional
oversampling and decimation supporting up to 16-bit resolution, one 10-bit 350ksps DAC, two
analog comparators with window mode, Peripheral Touch Controller supporting up to 256
buttons, sliders, wheels and proximity sensing; programmable Watchdog Timer, brown-out
detector and power-on reset and two-pin Serial Wire Debug (SWD) program and debug interface.
All devices have accurate and low-power external and internal oscillators. All oscillators can be
used as a source for the system clock. Different clock domains can be independently configured
to run at different frequencies, enabling power saving by running each peripheral at its optimal
clock frequency, and thus maintaining a high CPU frequency while reducing power consumption.
The SAM D21 devices have two software-selectable sleep modes, idle and standby. In idle mode
the CPU is stopped while all other functions can be kept running. In standby all clocks and
functions are stopped expect those selected to continue running. The device supports
SleepWalking. This feature allows the peripheral to wake up from sleep based on predefined
conditions, and thus allows the CPU to wake up only when needed, e.g. when a threshold is
crossed or a result is ready. The Event System supports synchronous and asynchronous events,
allowing peripherals to receive, react to and send events even in standby mode.
The Flash program memory can be reprogrammed in-system through the SWD interface. The
same interface can be used for non-intrusive on-chip debug of application code. A boot loader
running in the device can use any communication interface to download and upgrade the
application program in the Flash memory.
The Atmel SAM D21 devices are supported with a full suite of program and system development
tools, including C compilers, macro assemblers, program debugger/simulators, programmers and
evaluation kits.
Atmel-42181G–SAM-D21_Datasheet–09/2015

line_dark_gray
SAMD21E equivalent
2. Ordering Information
SAMD 21 E 15 A - M U T
Product Family
SAMD = General Purpose Microcontroller
Product Series
21 = Cortex M0 + CPU, Basic Feature Set
+ DMA + USB
Pin Count
E = 32 Pins
G = 48 Pins
J = 64 Pins
Flash Memory Density
18 = 256KB
17 = 128KB
16 = 64KB
15 = 32KB
Device Variant
A = Default Variant
B = Added RWW support for 32KB and 64KB memory options
2.1 SAM D21E
2.1.1 Device Variant A
Ordering Code
ATSAMD21E15A-AU
ATSAMD21E15A-AUT
ATSAMD21E15A-AF
ATSAMD21E15A-AFT
ATSAMD21E15A-MU
ATSAMD21E15A-MUT
ATSAMD21E15A-MF
ATSAMD21E15A-MFT
FLASH (bytes)
SRAM (bytes)
32K 4K
Package Carrier
No character = Tray (Default)
T = Tape and Reel
Package Grade
U = -40 - 85OC Matte Sn Plating
F = -40 - 125OC Matte Sn Plating
Package Type
A = TQFP
M = QFN
U = WLCSP
C = UFBGA
Package
TQFP32
QFN32
Carrier Type
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Tray
Tape & Reel
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181G–SAM-D21_Datasheet–09/2015
5


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SAMD21E electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SAMD21E.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SAMD21EThe function is SMART ARM-Based Microcontroller. ATMEL CorporationATMEL Corporation
SAMD21GThe function is SMART ARM-Based Microcontroller. ATMEL CorporationATMEL Corporation
SAMD21JThe function is SMART ARM-Based Microcontroller. ATMEL CorporationATMEL Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SAMD     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search