1N4148WS Datasheet PDF - Vishay
|Description||Small Signal Fast Switching Diode|
There is a preview and 1N4148WS download ( pdf file ) link at the bottom of this page.
Total 5 Pages
Preview 1 page
No Preview Available !
Small Signal Fast Switching Diode
MARKING (example only)
Bar = cathode marking
XY = type code
Weight: approx. 4.3 mg
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
• Silicon epitaxial planar diode
• Fast switching diodes
• AEC-Q101 qualified
• Base P/N-E3 - RoHS-compliant, commercial
• Base P/N-HE3 - RoHS-compliant, AEC-Q101
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
1N4148WS-E3-08 or 1N4148WS-E3-18
1N4148WS-HE3-08 or 1N4148WS-HE3-18
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
Repetitive peak reverse voltage
Average rectified current half wave
rectification with resistive load (1)
f 50 Hz
Surge forward current
Power dissipation (1)
t < 1 s and Tj = 25 °C
(1) Valid provided that electrodes are kept at ambient temperature.
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Thermal resistance junction to ambient air (1)
Storage temperature range
Operating temperature range
(1) Valid provided that electrodes are kept at ambient temperature
- 65 to + 150
- 55 to + 150
Rev. 2.0, 14-May-13
1 Document Number: 85751
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
1 Document Number: 91000
Preview 5 Page
On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for 1N4148WS electronic component.
|Information||Total 5 Pages|
|Link URL||[ Copy URL to Clipboard ]|
|Product Image |
and Detail view
1. 300mA, 100V, Diode - Fairchild
[ Learn More ]
|Download||[ 1N4148WS.PDF Datasheet ]|
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.
|SparkFun Electronics||Allied Electronics||DigiKey Electronics||Arrow Electronics|
|Mouser Electronics||Adafruit||Newark||Chip One Stop|
|1N4148W||The function is SURFACE MOUNT SWITCHING DIODES.|
Pan Jit International Inc.
|1N4148W||The function is SURFACE MOUNT FAST SWITCHING DIODE.|
|1N4148W||The function is SURFACE MOUNT SWITCHING DIODE.|
Semiconductors commonly used in industry:
Quick jump to: