DataSheet39.com

SP8K32 Datasheet PDF - Rohm

Part Number SP8K32
Description 4V Drive Nch+Nch MOSFET
Manufacturers Rohm 
Logo Rohm Logo 

Preview ( 5 pages )
		
SP8K32 datasheet, circuit
Transistor
4V Drive Nch+Nch MOSFET
SP8K32
SP8K32
zStructure
Silicon N-channel
MOSFET
zFeatures
1) Built-in G-S Protection Diode.
2) Small surface Mount Package (SOP8).
zDimensions (Unit : mm)
SOP8
zApplications
Switching
Each lead has same dimensions
zPackaging specifications
Package
Type
Code
Basic ordering unit (pieces)
SP8K32
Taping
TB
2500
zAbsolute maximum ratings (Ta=25°C)
<It is the same ratings for the Tr1 and Tr2.>
Parameter
Symbol
Drain-source voltage
VDSS
Gate-source voltage
VGSS
Drain current
Continuous
Pulsed
ID
IDP 1
Source current
(Body diode)
Continuous
Pulsed
Total power dissipation
IS
ISP 1
PD 2
Channel temperature
Tch
Range of storage temperature
Tstg
1 Pw 10µs, Duty cycle 1%
2 Mounted on a ceramic board.
Limits
60
±20
±4.5
±18
1.0
18
2.0
150
55 to +150
zEquivalent circuit
(8) (7)
(6) (5) (8) (7) (6) (5)
2 2
(1) (2) (3) (4)
1 1
(1) (2)
(3) (4)
1 ESD PROTECTION DIODE
2 BODY DIODE
(1) Tr1 Source
(2) Tr1 Gate
(3) Tr2 Source
(4) Tr2 Gate
(5) Tr2 Drain
(6) Tr2 Drain
(7) Tr1 Drain
(8) Tr1 Drain
A protection diode is included between the gate and
the source terminals to protect the diode against static
electricity when the product is in use. Use the protection
circuit when the fixed voltages are exceeded.
Unit
V
V
A
A
A
A
W/TOTAL
°C
°C
1/4

No Preview Available !


1 page
line_dark_gray
SP8K32 equivalent
Appendix
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM
CO.,LTD.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM
upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account when
designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no respon-
sibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples of
application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or
exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility
whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment or
devices (such as audio visual equipment, office-automation equipment, communication devices, electronic
appliances and amusement devices).
The Products are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your
use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system
which requires an extremely high level of reliability the failure or malfunction of which may result in a direct
threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,
aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no
responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended
to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under
the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
THE AMERICAS / EUROPE / ASIA / JAPAN
www.rohm.com
Contact us : webmaster@ rohm.co.jp
Copyright © 2008 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev3.0

5 Page
line_dark_gray


Information Total 5 Pages
Download[ SP8K32.PDF Datasheet ]

Share Link :

Electronic Components Distributor

SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Element14 Chip One Stop



Featured Datasheets

Part NumberDescriptionManufacturers
SP8K3The function is Transistor.Rohm
Rohm
SP8K31The function is 4V Drive Nch+Nch MOSFET.Rohm
Rohm
SP8K31FRAThe function is 4V Drive Nch+Nch MOSFET.Rohm
Rohm

Quick jump to:

SP8K  1N4  2N2  2SA  2SC  74H  ADC  BC  BF  BU  CXA  HCF  IRF  KA  KIA  LA  LM  MC  NE  ST  STK  TDA  TL  UA 


DataSheet39.com is an Online Datasheet PDF Search Site.
It offers a large amount of data sheet, You can free PDF files download.
The updated every day, always provide the best quality and speed.



keyword : SP8K32 schematic, SP8K32 equivalent, SP8K32 pinout

DataSheet39.com   |  2018   |  Privacy Policy |  Contact Us  | New  |  Search