DataSheet39.com

What is SMA150?

This electronic component, produced by the manufacturer "MIC", performs the same function as "TVS Diode, SMD (Transient Voltage Suppressor)".


SMA150 Datasheet PDF - MIC

Part Number SMA150
Description TVS Diode, SMD (Transient Voltage Suppressor)
Manufacturers MIC 
Logo MIC Logo 


There is a preview and SMA150 download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! SMA150 datasheet, circuit

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMA5.0 THRU SMA170CA
Stand-off Voltage
Peak Pulse Power
5.0 to 170 Volts
300 Watts
FEATURES
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition Rate (duty cycle): 0.01%
Fast response time: typical less than 1.0ps
from 0 volts to BV for unidirectional types
Typical ID less than 1μA above 10V
High temperature soldering:
250/W seconds at terminals
Plastic package has Underwriters
Laboratory Flammability Classification 94V-O
DO-214AC(SMA)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Cass: JEDEC DO-214 AC, low profile molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band except bi-directional types
Weight: 0.002 ounces, 0.064 gram
Standard Packaging: 12mm tape per (EIA-481)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25ambient temperature unless otherwise specified
Peak Pulse Power Dissipation at TA=25(NOTE1,2,5)Fig.1
Peak Forward Surge Current per Figure 5 (NOTE 3)
Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2)
Steady Stage Power Dissipation (Note 4)
Operating Junction and Storage Temperature Range
Symbols
PPPM
IFSM
IPPM
PM(AV)
TJ, TSTG
Value
Minimum 400
40.0
See Table 1
1.0
50 to + 150
Notes:
1. Non-repetitive current pulse, per Fog.3 and derated above TA=25per Fig.2
2. mounted on 5.0mm2 copper pads to each terminal.
3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum.
4. Lead temperature at 75= TL.
5. Peak pulse power waveform is 10/1000μS.
Unit
Watts
Amps
Amps
Watts
Web Site: www.hkmic.com


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SMA150 electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SMA150.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SMA15The function is UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS. Lite-On Technology CorporationLite-On Technology Corporation
SMA15The function is UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS. Lite-On Technology CorporationLite-On Technology Corporation
SMA15The function is TVS Diode, SMD (Transient Voltage Suppressor). MICMIC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SMA1     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search