|
|
Número de pieza | MPS-A4540F | |
Descripción | MP-Series Stainless Steel Motors | |
Fabricantes | Rockwell | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MPS-A4540F (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Kinetix Rotary Motion Specifications
MP-Series Stainless Steel Motors
MP-Series (Bulletin MPS) stainless-steel motors are specifically
designed to meet the unique needs of hygienic environments. With
these servo motors, the benefits of Kinetix Integrated Motion are
available to a greater range of applications, allowing the use of servo
motors even in high pressure, highly caustic washdown environments.
The MP-Series Stainless Steel motors extend the wide range of Allen-
Bradley servo motors into new applications on food, beverage,
brewing, dairy, pharmaceutical, and health and beauty manufacturing
equipment.
MP-Series Stainless Steel Motor Features
Attribute
Main characteristics
Features
Motor type
Environmental rating
Certifications
Continuous stall torque
Peak stall torque
Speed
Motor rated output
Compatible servo drives
Typical applications
Value
• Specifically designed for hygienic environments for use with high pressure, highly caustic
washdown applications
• Low rotor inertia
• Smooth, passivated 300 series stainless-steel cylindrical exterior
• Certified and listed to NSF/ANSI Standard 169
• 200V and 400V-class windings
• Shaft-end threaded hole
• Cable extensions, 3 m (9.8 ft)
• Standard IEC 72-1 mounting dimensions
Brushless AC synchronous servo motors
• IP66/IP67 with shaft seal (standard) and use of environmentally sealed cable connectors
• IP69K for 1200 psi washdown
Bulletin MPS rotary motors are UL Recognized components to applicable UL and CSA standards.
CE marked for all applicable directives. Refer to http://www.ab.com for more information.
3.6…21.5 N•m (32…190 lb•in)
11.1…98 N•m (67.8…600 lb•in)
3000 and 5000 rpm
1.3…3.5 kW
• Kinetix 5500 (1)
• Kinetix 6200/6500
• Kinetix 6000
• Kinetix 300/350
• Kinetix 2000
• Ultra3000
• Meat and poultry
• Food slicing and filling
• Raw food handling
• Processing
• Life science
• Consumer products
(1) Requires the 2198-H2DCK Hiperface-to-DSL feedback converter kit. MP-Series (200V-class) stainless-steel motors require the 2198-H2DCK
(series B or later) converter kit.
86 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014
1 page Kinetix Rotary Motion Specifications
MP-Series Stainless Steel Motor Load Force Ratings
Bulletin MPS motors are capable of operating with the maximum radial or maximum axial shaft loads listed in the
following tables. Radial loads listed are applied in the middle of the shaft extension. The tables starting below represent an
L10 bearing fatigue life of 20,000 hours. This 20,000-hour life does not account for possible application-specific life
reduction that can occur due to bearing grease contamination from external sources. Maximum operating speed is limited
by motor winding.
Radial Load Force Ratings
Motor Cat. No.
MPS-A/B330
MPS-A/B4540
MPS-B560
500 rpm
kg (lb)
–
140 (309)
–
1000 rpm
kg (lb)
74 (163)
111 (245)
154 (338)
2000 rpm
kg (lb)
59 (130)
89 (195)
122 (268)
3000 rpm
kg (lb)
–
77 (170)
106 (234)
3500 rpm
kg (lb)
49 (108)
–
–
4000 rpm
kg (lb)
–
–
–
5000 rpm
kg (lb)
43 (95)
–
–
MPS-xxxxx-xJ5xDA Load Forces
Radial load force applied at center of shaft extension.
Axial Load Force
Axial Load Force Ratings (maximum radial load)
Motor Cat. No.
MPS-A/B330
MPS-A/B4540
MPS-B560
500 rpm
kg (lb)
–
49 (107)
–
1000 rpm
kg (lb)
27 (59)
36 (80)
52 (115)
Axial Load Force Ratings (zero radial load)
Motor Cat. No.
MPS-A/B330
MPS-A/B4540
MPS-B560
500 rpm
kg (lb)
–
69 (152)
–
1000 rpm
kg (lb)
36 (79)
51 (112)
68 (149)
2000 rpm
kg (lb)
20 (44)
27 (59)
39 (85)
2000 rpm
kg (lb)
27 (59)
38 (83)
50 (109)
3000 rpm
kg (lb)
–
22 (49)
32 (71)
3000 rpm
kg (lb)
–
31 (69)
42 (92)
3500 rpm
kg (lb)
16 (35)
–
–
3500 rpm
kg (lb)
21 (46)
–
–
4000 rpm
kg (lb)
–
–
–
4000 rpm
kg (lb)
–
–
–
5000 rpm
kg (lb)
13 (29)
–
–
5000 rpm
kg (lb)
18 (40)
–
–
90 Rockwell Automation Publication GMC-TD001F-EN-P - April 2014
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet MPS-A4540F.PDF ] |
Número de pieza | Descripción | Fabricantes |
MPS-A4540F | MP-Series Stainless Steel Motors | Rockwell |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |