|
|
PDF AX1012 Data sheet ( Hoja de datos )
| Número de pieza | AX1012 | |
| Descripción | RS232 to RS422/485 converter | |
| Fabricantes | Nedap | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AX1012 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
®
AX1012
AX1012
RS232 to RS422/485 converter for AEpacks
Installation sheet
GENERAL
The AX1012 is a RS232 to RS422/RS485 converter, intended to connect external readers using
RS422 or 485 to AEpacks (using RS232). Both RS422 and RS485 are NON-isolated.
The AX1012 is mounted on the RS232 connector points of the corresponding AEpack. Power supply
(+5VDC) for the AX1012 is connected by a separate wire from the AX1012 to the AEpack.
Connection point for the +5V power supply differs per type AEpack (check always the AEpack
installation sheet for detailed information).
RS422 or RS485 selection is made by a jumper.
Remark: For integrating AEOS with XS-Accessors always use the AX1011 (connected to AP1003)
CONNECTIONS AX1012
Place the AX1012 at the RS232 connector-points of the
AEpack and connect the power-supply lead to the correct
connector of this AEpack (AEpack depending!)
RS422:
RS485:
Use Tx+, Tx-, Rx+ and Rx-
Set jumper to RS422
Use only Rx+ and Rx-
Set jumper to RS485
Peripheral connections:
RS422
AX1012 Device
Tx+ Rx+
Tx- Rx-
Rx+ Tx+
Rx- Tx-
RS485
AX1012 Device
--
--
Rx+ A
Rx- B
AEpack To AEpack RS232
+5V Tx GND Rx
Rx GND Tx
+5V
Power
supply lead
Tx+ Tx- Rx+ Rx-
RS422 Out RS422 In
RS485 In/Out
External device
JUMPER SETTINGS: RS422 or RS485 can be selected
CABLE SHIELDING: Use always shielded cables: cable shield must be connected to protective
ground.
Date : 02 September 2005
Part.no.: 5258480
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or
other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change
without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher.
© Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands
Page 1 of 2
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet AX1012.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AX1011 | RS422-module | Nedap |
| AX1012 | RS232 to RS422/485 converter | Nedap |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |