AFBR-4526Z Datasheet PDF - Avago
Part Number | AFBR-4526Z | |
Description | Plastic optical fiber duplex connector | |
Manufacturers | Avago | |
Logo | ||
There is a preview and AFBR-4526Z download ( pdf file ) link at the bottom of this page. Total 4 Pages |
Preview 1 page No Preview Available ! AFBR-4526Z, AFBR-452BZ
Plastic optical fiber duplex connector for AFBR-5972xZ
Data Sheet
Description
The AFBR-452xZ duplex connectors are designed for use
with Avago Technologies’ fast Ethernet transceiver AFBR-
5972xZ. The rugged design contains a latching mecha-
nism for an increased retention force. The simple snap-
together concept saves the user labor and tool cost.
The connectors are made of a rugged, flame retardant
plastic which is good for industrial and other harsh envi-
ronments. The AFBR-452xZ duplex connectors are for use
with Plastic Optical Fiber (POF) only.
For termination of POF with AFBR-452xZ, we recommend
to use the polishing kit AFBR-4594Z.
Absolute maximum ratings
Parameter
Storage and operating temperature
Recommended operation temperature
Installation temperature
Min
-40
-40
0
Features
• ULTEM Plastic Material (UL File #E121562)
• Available in two colors: black and blue
• Suitable for 1mm diameter duplex plastic optical fiber
(POF)
• Latching mechanism for increased retention force
• Easy installation of POF links with AFBR-5972xZ
Applications
• Industrial data links for factory automation and plant
control
• Intra-system links, board-to-board, rack-to-rack
• Medical instruments
• High voltage isolation
Max Unit Note
85 °C 1
85 °C 1
70 °C 1
Mechanical characteristics
Parameter
Min Typ. Max Unit Temp. [°C]
Note
Retention force, connector to transceiver;
latching button pressed
15 20
N 25
2
Retention force, connector to transceiver;
latching button NOT pressed
24
8
N 25
-40 to +85
2,3
Tensile force, connector to cable
90 N
2
Insertion force, connector to transceiver
20 N
2
Notes:
1. Storage and operating temperatures refer to the ranges over which the connectors can be used when not subjected to mechanical stress.
Installation temperature refers to the ranges over which connectors may be installed onto the fiber and over which connectors can be connected
and disconnected from the trnasceiver.
2. Typical data at 25°C.
3. CAUTION - The latching mechanism release button should be pressed before attempting to disconnect the fiber. If the connector is pulled out of
the transceiver without pressing the lever, damage will occur.
|
|
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AFBR-4526Z electronic component. |
Information | Total 4 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AFBR-4526Z.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AFBR-4526Z | The function is Plastic optical fiber duplex connector. Avago | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AFBR
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |