DataSheet39.com

What is ACNW3130?

This electronic component, produced by the manufacturer "AVAGO", performs the same function as "Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler".


ACNW3130 Datasheet PDF - AVAGO

Part Number ACNW3130
Description Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Manufacturers AVAGO 
Logo AVAGO Logo 


There is a preview and ACNW3130 download ( pdf file ) link at the bottom of this page.





Total 20 Pages



Preview 1 page

No Preview Available ! ACNW3130 datasheet, circuit

ACPL-3130/J313, ACNW3130
Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-3130 contains a GaAsP LED while the ACPL-
J313 and the ANCW3130 contain an AlGaAs LED. The LED
is optically coupled to an integrated circuit with a power
output stage. These optocouplers are ideally suited for
driving power IGBTs and MOSFETs used in motor control
inverter applications. The high operating voltage range
of the output stage provides the drive voltages required
by gate controlled devices. The voltage and current
supplied by these optocouplers make them ideally suited
for directly driving IGBTs with ratings up to 1200 V/100 A.
For IGBTs with higher ratings, the ACPL-3130 series can be
used to drive a discrete power stage which drives the IGBT
gate. The ANCW3130 has the highest insulation voltage of
VIORM = 1414 Vpeak in the IEC/EN/DIN EN 60747-5-2. The
ACPL-J313 has an insulation voltage of VIORM = 891 Vpeak
and the VIORM = 630 Vpeak is also available with the ACPL-
3130 (Option 060).
Functional Diagram
N/C 1
8 VCC
ANODE 2
7 VO
CATHODE 3
6 VO
N/C 4
SHIELD
5 VEE
ACPL-3130 and ACPL-J313
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
8 VCC
7 VO
6 N/C
5 VEE
Features
High speed response.
Very high CMR.
Bootstrappable supply current.
Safety Approval (pending):
UL Recognized
- 3750 Vrms for 1 min. for ACPL-3130/J313.
- 5000 Vrms for 1 min. For ACNW3130
CSA Approval
IEC/EN/DIN EN 60747-5-2 Approved
- VIORM = 630 Vpeak for ACPL-3130 (Option 060)
- VIORM = 891 Vpeak for ACPL-J313
- VIORM = 1414 Vpeak for ACNW3130
Specifications
2.5 A maximum peak output current.
2.0 A minimum peak output current.
40 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 1500 V
0.5V maximum low level output voltage (VOL) eliminates
need for negative gate drive
ICC = 5 mA maximum supply current
Under Voltage Lock-Out protection (UVLO) with
hysteresis
Wide operating VCC range: 15 to 30 Volts
500 ns maximum switching speeds
Industrial temperature range: -40°C to 100°C
Applications
IGBT/MOSFET gate drive
AC/Brushless DC motor drives
Industrial inverters
Switching Power Supplies (SPS)
ACNW3130
Note: A 0.1 µF bypass capacitor must be connected between pins VCC and VEE.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.


line_dark_gray
ACNW3130 equivalent
ACNW3130 Outline Drawing (8-Pin Wide Body Package / 400mil DIP)
11.15 ± 0.15
(0.442 ± 0.006)
87 6 5
A
ACNWXXXX
YYWW
TYPE NUMBER
DATE CODE
1234
1.55
(0.061)
MAX.
11.00
(0.433)
MAX.
9.00 ± 0.15
(0.354 ± 0.006)
10.16 (0.400)
TYP.
7 TYP.
5.10
(0.201)
MAX.
0.254
+ 0.076
- 0.0051
(0.010
+ 0.003)
- 0.002)
2.54 (0.100)
TYP.
1.78 ± 0.15
(0.070 ± 0.006)
3.10 (0.122)
3.90 (0.154)
0.51 (0.021) MIN.
0.40 (0.016)
0.56 (0.022)
DIMENSIONS IN MILLIMETERS (INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
ACNW3130 Gull Wing Surface Mount Option 300 Outline Drawing
11.15 ± 0.15
(0.442 ± 0.006)
LAND PATTERN RECOMMENDATION
87 6 5
9.00 ± 0.15
(0.354 ± 0.006)
1234
1.55
(0.061)
MAX.
4.00
(0.158)
MAX.
13.56
(0.534)
1.3
(0.051)
12.30 ± 0.30
(0.484 ± 0.012)
11.00
(0.433)
MAX.
2.29
(0.09)
1.78 ± 0.15
(0.070 ± 0.006)
2.54
(0.100)
BSC
0.75 ± 0.25
(0.030 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.

1.00 ± 0.15
(0.039 ± 0.006)
0.254
+ 0.076
- 0.0051
(0.010
+ 0.003)
- 0.002)
7 NOM.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ACNW3130 electronic component.


Information Total 20 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ACNW3130.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ACNW3130The function is Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler. AVAGOAVAGO

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ACNW     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search