|
|
PDF TS391 Data sheet ( Hoja de datos )
| Número de pieza | TS391 | |
| Descripción | Low Power Single Voltage Comparator | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TS391 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
TS391, NCV391
Low Power Single Voltage
Comparator
Description
The TS391 is an open collector, low−power voltage comparator
designed specifically to operate from a single supply over a wide range
of voltages. Operation from split power supplies is also possible.
This comparator also has a unique characteristic in that the input
common−mode voltage range includes ground, even though operated
from a single power supply voltage.
Features
• Wide Single Supply Voltage Range or Dual Supplies
• Low Supply Current (0.5 mA) Independent of Supply Voltage
(1 mW/Comparator at +5 V)
• Low Input Bias Current: 25 nA TYP
• Low Input Offset Current: ±5 nA TYP
• Low Input Offset Voltage: ±1 mV TYP
• Input Common Mode Voltage Range includes Ground
• Low Output Saturation Voltage: 250 mV TYP at IO = 4 mA
• Differential Input Voltage Range Equal to the Supply Voltage
• TTL, DTL, ECL, CMOS Compatible Devices
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
VCC
http://onsemi.com
5
1
TSOP−5
SN SUFFIX
CASE 483
MARKING DIAGRAM
5
391AYWG
G
1
Analog
391 = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
OUT 1
VEE 2
IN− 3
5 VCC
4 IN+
IN+
VEE
IN−
VEE
© Semiconductor Components Industries, LLC, 2013
December, 2013 − Rev. 3
Vout ORDERING INFORMATION
Device
Package
Shipping†
TS391SN2T1G
TSOP−5
(Pb−Free)
3000 / Tape &
Reel
NCV391SN2T1G*
TSOP−5
(Pb−Free)
3000 / Tape &
Reel
VEE †For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
* NCV Prefix for Automotive and Other Applications
Requiring Unique Site and Control Change Require-
ments; AEC−Q100 Qualified and PPAP Capable
1 Publication Order Number:
TS391/D
1 page  
TS391, NCV391
PACKAGE DIMENSIONS
TSOP−5
CASE 483−02
ISSUE K
NOTE 5
2X 0.10 T
2X 0.20 T B 5 4
1 23
BG
AA
TOP VIEW
D 5X
0.20 C A B
S
M
K
DETAIL Z
C
0.05 H
SIDE VIEW
C
SEATING
PLANE
DETAIL Z
J
END VIEW
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE
MINIMUM THICKNESS OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR GATE BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT
EXCEED 0.15 PER SIDE. DIMENSION A.
5. OPTIONAL CONSTRUCTION: AN ADDITIONAL
TRIMMED LEAD IS ALLOWED IN THIS LOCATION.
TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2
FROM BODY.
MILLIMETERS
DIM MIN MAX
A 3.00 BSC
B 1.50 BSC
C 0.90 1.10
D 0.25 0.50
G 0.95 BSC
H 0.01 0.10
J 0.10 0.26
K 0.20 0.60
M 0 _ 10 _
S 2.50 3.00
SOLDERING FOOTPRINT*
0.95
0.037
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
ǒ ǓSCALE 10:1
mm
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
TS391/D
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TS391.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TS391 | LOWPOWER SINGLE VOLTAGE COMPARATORS |  STMicroelectronics |
| TS391 | LOW POWER SINGLE VOLTAGE COMPARATOR |  Unisonic Technologies |
| TS391 | Low Power Single Voltage Comparator | ON Semiconductor |
| TS39100 | (TS39100 - TS39105) 1A Ultra Low Dropout Voltage Regulator |  Taiwan Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |