|
|
Datasheet AT91SAM7S321 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | AT91SAM7S321 | (AT91SAM7Sxxx) low pincount Flash microcontroller Features
• Incorporates the ARM7TDMI® ARM® Thumb® Processor
– High-performance 32-bit RISC Architecture – High-density 16-bit Instruction Set – Leader in MIPS/Watt – EmbeddedICE™ In-circuit Emulation, Debug Communication Channel Support • Internal High-speed Flash – 512 Kbytes (AT |  ATMEL Corporation | controller |
| 2 | AT91SAM7S321 | ARM-based Flash MCU AT91SAM ARM-based Flash MCU
SAM7S512 SAM7S256 SAM7S128 SAM7S64 SAM7S321 SAM7S32 SAM7S161 SAM7S16
Features
• Incorporates the ARM7TDMI® ARM® Thumb® Processor – High-performance 32-bit RISC Architecture – High-density 16-bit Instruction Set – Leader in MIPS/Watt – EmbeddedICE™ In-circui | ATMEL Corporation | data |
AT9 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | AT90-0001 | Digital Attenuator/ 31.0 dB/ 5-Bit/ TTL Driver/ DC-6.0 GHz Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
V 5.00
AT90-0001
Features
n n n n n n n
CSP-1
Attenuation: 1.0 dB Steps to 31 dB High Accuracy to 6 GHz Small Footprint, JEDEC Package Integral TTL driver 50 ohm impedance Test boards are available Tape and Reel Packaging Available
Des  Tyco Electronics driver | | |
| 2 | AT90-0001-TB | Digital Attenuator/ 31.0 dB/ 5-Bit/ TTL Driver/ DC-6.0 GHz Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
V 5.00
AT90-0001
Features
n n n n n n n
CSP-1
Attenuation: 1.0 dB Steps to 31 dB High Accuracy to 6 GHz Small Footprint, JEDEC Package Integral TTL driver 50 ohm impedance Test boards are available Tape and Reel Packaging Available
Des Tyco Electronics driver | | |
| 3 | AT90-0001TR | Digital Attenuator/ 31.0 dB/ 5-Bit/ TTL Driver/ DC-6.0 GHz Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
V 5.00
AT90-0001
Features
n n n n n n n
CSP-1
Attenuation: 1.0 dB Steps to 31 dB High Accuracy to 6 GHz Small Footprint, JEDEC Package Integral TTL driver 50 ohm impedance Test boards are available Tape and Reel Packaging Available
Des Tyco Electronics driver | | |
| 4 | AT90-0106 | Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
V 5.00
AT90-0106
Features
n n n n n n n
CSP-1
Attenuation: 1 dB Steps to 50 dB Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel Packaging Available
Descr Tyco Electronics driver | | |
| 5 | AT90-0106-TB | Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
V 5.00
AT90-0106
Features
n n n n n n n
CSP-1
Attenuation: 1 dB Steps to 50 dB Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel Packaging Available
Descr Tyco Electronics driver | | |
| 6 | AT90-0106TR | Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC-2.4 GHz Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
V 5.00
AT90-0106
Features
n n n n n n n
CSP-1
Attenuation: 1 dB Steps to 50 dB Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel Packaging Available
Descr Tyco Electronics driver | | |
| 7 | AT90-0107 | Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC-4.0 GHz Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC-4.0 GHz
V 7.00
AT90-0107
Features
n n n n n n n
CSP-1
Attenuation: 0.5 dB Steps to 31.5 dB Low DC Power Consumption Small Footprint, JEDEC Package Integral TTL Driver 50 ohm Impedance Test Boards are Available Tape and Reel Packaging Available
Tyco Electronics driver | |
| Esta página es del resultado de búsqueda del AT91SAM7S321. Si pulsa el resultado de búsqueda de AT91SAM7S321 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |