AH1903 Datasheet PDF - Diodes
Part Number | AH1903 | |
Description | HIGH SENSITIVITY MICROPOWER UNIPOLAR/OMNIPOLAR SELECTABLE HALL-EFFECT SWITCH | |
Manufacturers | Diodes | |
Logo | ||
There is a preview and AH1903 download ( pdf file ) link at the bottom of this page. Total 11 Pages |
Preview 1 page No Preview Available ! AH1903
HIGH SENSITIVITY MICROPOWER
UNIPOLAR/OMNIPOLAR SELECTABLE HALL-EFFECT SWITCH
Description
The AH1903 is a high sensitivity micropower Omnipolar or Unipolar
selectable Hall effect switch IC with internal pull up and pull down
capability. Designed for battery powered consumer equipment such
as cellular phones and portable PCs to office equipment, home
appliances and industrial applications, the average supply current is
only 4.3µA at 1.8V. To support portable equipment the AH1903 can
operate over the supply range of 1.6V to 3.6V and uses a hibernating
clocking system to minimize the power consumption. To minimize
PCB space the AH1903 is available in a small low profile
X1-DFN1216-4 package.
The user can change the Hall switch function between Unipolar and
Omnipolar operation via the Select (SEL) pin. If the SEL pin is open
circuit or pulled high the AH1903 operates in Unipolar switch mode
detecting magnetic field direction with a South pole to the part mark
side of the package. If the SEL pin is pulled low the AH1903 functions
as a Omnipolar switch detecting either a North or South pole. The
output is activated with a pole of sufficient magnetic field strength.
When the magnetic flux density (B) perpendicular to the package is
larger than operate point (Bop), the output will be turned on (pulled
low) and held until B is lower than release point (Brp).
Pin Assignments
Applications
• Open and Close Detect for flip/slide Cellular Phones
• Smart Cover or Dock Detect for Cellular Phones and Tablet PCs
• Cover or Display Switch in Portable PCs (eg Ultrabook)
• Digital Still, Video Cameras and Handheld Gaming Consoles
• Door, Lids and Tray Position Switches
• Level, Proximity and Position Switches
• Contact-Less Switches in Home Appliances and Industrial
Applications
Features
• Unipolar or Omnipolar Operation
Operation can be changed by a logic source or fixed via
PCB design with no additional components
• Supply Voltage of 1.6V to 3.6V
• High Sensitivity
• Micropower Operation
• Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Physical Stress
• No External Pull-up Resistors Required
• Good RF Noise Immunity
• -40°C to +85°C Operating Temperature
• High ESD capability of 8kV (Human Body Model) on VDD, GND
and OUTPUT Pins
• Small Low Profile X1-DFN1216-4 Package
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Typical Application Circuit
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 100nF typical and should be placed as close to the
supply pin as possible.
AH1903
Document number: DS36568 Rev. 3 - 2
1 of 11
www.diodes.com
June 2014
© Diodes Incorporated
|
|
AH1903
Application Notes
The AH1903 includes a Hall switch function select pin (SEL) so that the AH1903 can be changed between an Unipolar or an Omnipolar Hall
Switch operation to fit a multitude of applications. The diagrams below show the different switching functions between the Unipolar and the
Omnipolar Hall switch types.
AH1903 in Unipolar Operation
In Unipolar mode, the sensor detects the magnetic flux density perpendicular to the part marking surface with magnetic field direction only from
the back to the front of the package as shown below. This magnetic field direction is similar to having a South pole on the part marking side or a
North pole to the back of the package.
Magnetic Field Direction for Unipolar Mode Operation
AH1903 in Omnipolar Operation
In Omnipolar mode, the sensor detects the magnetic flux density perpendicular to the part marking surface with magnetic field directions from the
front to the back as well as from the back to the front of the package as shown below. The sensor detects both North or South pole to the part
marking side or to the back of the package.
Magnetic Field Directions for Omnipolar Mode Operation
The AH1903 includes a function select pin (SEL) to change the device type between Unipolar and Omnipolar operations. The SEL pin can be
hard wired within the application circuit or can be changed on the fly by using the SEL pin as a logic input. This feature allows the AH1903
operating mode to be changed by firmware within the application without the addition of any external components. If the SEL pin is left open
circuit the AH1903 defaults to Unipolar mode.
AH1903
Document number: DS36568 Rev. 3 - 2
5 of 11
www.diodes.com
June 2014
© Diodes Incorporated
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AH1903 electronic component. |
Information | Total 11 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AH1903.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AH1902 | The function is HIGH SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH. Diodes | |
AH1903 | The function is HIGH SENSITIVITY MICROPOWER UNIPOLAR/OMNIPOLAR SELECTABLE HALL-EFFECT SWITCH. Diodes | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AH19
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |