|
|
Número de pieza | N101ICG-L21 | |
Descripción | LCD Module | |
Fabricantes | CHIMEI Innolux | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de N101ICG-L21 (archivo pdf) en la parte inferior de esta página. Total 28 Páginas | ||
No Preview Available ! PRODUCT SPECIFICATION
Doc. Number:
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: N101ICG
SUFFIX: L21
Customer:
APPROVED BY
Name / Title
Note
SIGNATURE
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
Checked By Prepared By
Version 3.0
30 May 2012
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
1 / 28
1 page PRODUCT SPECIFICATION
3. ABSOLUTE MAXIMUM RATINGS
3.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Value
Min. Max.
Storage Temperature
TST
Operating Ambient Temperature
TOP
Note (1) (a) 90 %RH Max. (Ta <= 40 ºC).
-20
-10
+70
+60
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be -10 ºC min. and 70 ºC max.
Unit
ºC
ºC
Note
(1)
(1), (2)
Relative Humidity
(% RH)
100
90
80
70
60
50
40
30
20
10
0
-50 -30 -10 10 30 50 70 90
Temperature (ºC)
3.2 ELECTRICAL ABSOLUTE RATINGS
3.2.1 TFT LCD MODULE
Item
Power Supply Voltage
Logic Input Voltage
Converter Input Voltage
Symbol
VCCS
VIN
LED_VCCS
Value
Min. Max.
-0.3 +4.0
-0.3 VCCS+0.3
-0.3 (25)
Unit
V
V
V
Note
(1)
(1)
Converter Control Signal Voltage LED_PWM,
-0.3
(5)
V
(1)
Converter Control Signal Voltage
LED_EN
-0.3
(5)
V
(1)
Note (1) Stresses beyond those listed in above “ELECTRICAL ABSOLUTE RATINGS” may cause
permanent damage to the device. Normal operation should be restricted to the conditions
described in “ELECTRICAL CHARACTERISTICS”.
Version 3.0
30 May 2012
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
5 / 28
5 Page PRODUCT SPECIFICATION
VLED rising time is 0.5ms
0.5ms
90%
LED_VCC 0V
10%
LED_PWM 0V
LED_EN
0V
ILEDRush
ILED
100ms
ILEDIS
Note (2) If the PWM control duty ratio is less than 10%, there is some possibility that acoustic noise or
backlight flash can be found. And it is also difficult to control the brightness linearity.
Note (3) If PWM control frequency is applied in the range less than 1KHz, the “waterfall” phenomenon on
the screen may be found. To avoid the issue, it’s a suggestion that PWM control frequency should
follow the criterion as below.
PWM control frequency fPWM should be in the range
(N + 0.33) ∗ f ≤ fPWM ≤ (N + 0.66) ∗ f
N : Integer (N ≥ 3)
f : Frame rate
Note (4) The specified LED power supply current is under the conditions at “LED_VCCS = Typ.”, Ta = 25
± 2 ºC, fPWM = 200 Hz, Duty=100%.
Version 3.0
30 May 2012
11 / 28
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
11 Page |
Páginas | Total 28 Páginas | |
PDF Descargar | [ Datasheet N101ICG-L21.PDF ] |
Número de pieza | Descripción | Fabricantes |
N101ICG-L21 | LCD Module | CHIMEI Innolux |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |