|
|
Número de pieza | A070VW08-V0 | |
Descripción | COLOR TFT-LCD MODULE | |
Fabricantes | AUO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A070VW08-V0 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! CUSTOMER APPROVAL SHEET
Company Name
MODEL
CUSTOMER
APPROVED
A070VW08 V0
Title :
Name :
□ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 0.3 )
□ APPROVAL FOR SPECIFICATIONS AND ES SAMPLE (Spec. Ver. 0.3)
□ APPROVAL FOR SPECIFICATIONS AND CS SAMPLE (Spec. Ver. 0.3 )
□ CUSTOMER REMARK :
AUO PM : Ting Chang
P/N : 97.07A19.000
Comment :
1 Li-Hsin Rd. 2. Science-Based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Tel: +886-3-500-8899
Fax: +886-3-577-2730
Doc. version :
Total pages :
0.3
28
1 page Version:
Page:
0.3
3/28
A. General Information
This product is for digital photo frame and other suitable application.
NO. Item Unit Specification
1
Screen Size
inch
7(Diagonal)
2
Display Resolution
dot
800(H)×480RGB(V)
3
Overall Dimension
mm 164(H) × 103(V) × 5.1(T)
4
Active Area
mm 152.40(H)×91.44(V)
5
Pixel Pitch
mm 0.1905(H)×0.1905(V)
6 Color Configuration --
Tri-Gate
7 Color Depth --
16.7M Colors
8 NTSC Ratio %
50
9 Display Mode --
Normally White
10 Panel surface Treatment
--
Anti-Glare, 3H
11 Weight
g
150±10
12
Panel Power Consumption
mW
0.19
13 Backlight Power Consumption W
1.8
Viewing direction
6 o’clock (gray inversion)
Note 1: Not include blacklight cable and FPC. Refer next page to get further information.
Note 2: Below figure shows dot stripe arrangement.
Remark
Note 1
Note 2
Note 3
Note 4
Note 3: The full color display depends on 24-bit data signal ( pin 33~40, 42~49, 51~58)
Note 4: Please refer to Electrical Characteristics chapter.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
5 Page Version:
Page:
0.3
9/28
b. Current Consumption (AGND=GND=0V)
Parameter
Symbol
Condition
Input current for VDDIO IVDDIO
VDDIO=3.3V
Inpur current for VDPA
IVDPA
VDPA=5V
Input current for VDNA
IVDNA
VDNA=-5V
Min.
-
Typ. Max.
6.23 9
Unit
mA
- 5.42 12.9 mA
- -5.44 -13.4 mA
Inpur current for VGH
IVGH
VGH=14V
- 3.88 5
mA
Inpur current for VGL
IVGL
VGL= -14V
Note 1: The test pattern use the following pattern.
-3.94 -5
mA
Remark
Note 1
Note 1
Note 1
Note 1
Note 1
c. Backlight Driving Conditions
The backlight (LED module, Note 1) is suggested to drive by constant current 175mA.
Parameter
Symbol
Min.
Typ.
Max.
Unit
Remark
LED light bar Voltage
VL
8.85 9.75 10.95
V IF=175mA
Power Consumption
PBL
1.548
1.706
1.916
W
Note 1
LED Life Time
LL 10,000 --
--
Hr Note 2, 3
Note 1: The LED driving condition is defined for LED module (21 LED). The voltage range will be
8.85V to 10.95V based on suggested driving current set as 175mA.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet A070VW08-V0.PDF ] |
Número de pieza | Descripción | Fabricantes |
A070VW08-V0 | COLOR TFT-LCD MODULE | AUO |
A070VW08-V2 | COLOR TFT-LCD MODULE | AUO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |