|
|
PDF TLRA1002 Data sheet ( Hoja de datos )
| Número de pieza | TLRA1002 | |
| Descripción | LED SMD Lamp | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLRA1002 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
TOSHIBA
LED SMD Lamp
LED Surface Mount Device
Features
• 2.0(L) x 1.25(W) x 1.1(H) mm Size
- Small Package - High Density Mounting is Available
• Available for Automounting Machine Use
• Reflow Soldering is Applicable
• Low Drive Current, High Intensity Light Emission
- Recommended Forward Current: IF = 10 mA (DC)
• Fast Response Time
- Capable of Pulse Operation
• High Power Luminous Intensity
• Applications:
- Telephone Cordless/Cellular
- Portable Instrument
- Backlight, etc.
Line-Up
Product Name
TLPG1002
TLG1002
TLGD1002
TLYE1002
TLOE1002
TLS1002
TLRA1002
Color
Pure Green
Green
Green
Yellow
Orange
Red
Red
Material
GaP
GaP
GaP
InGaAlP
InGaAlP
GaAsP
GaAlAs
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
Unit in mm
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/11
1 page  
TLS1002
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TOSHIBA CORPORATION
5/11
5 Page 
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
Soldering
1. Reflow soldering:
* It is recommended to use a reflow furnace of the upper and lower heater type.* The temperature profile as shown
in Fig. 1 is recommended for soldering LEDs by the reflow furnace.
2. Post-solder cleaning:
When cleaning after soldering is needed, the following conditions must be adhered to.
– Cleaning solvents: AK225 or Alcohol
– Temperature: 50°C (122°F) MAX. for 30 seconds, or
30°C (86°F) MAX. for 3 minutes MAX.
– Ultrasonic: 300W MAX.
Precaution for Mounting
1. No force to plastic part of LED when LED is under high temperature.
2. No friction using a hard thing to avoid injuring plastic part of LED.
3. No contact between LED and the other parts, when installing an assembled board into the set.
TOSHIBA CORPORATION
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet TLRA1002.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLRA1002 | LED SMD Lamp | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |