|
|
PDF RTV31 Data sheet ( Hoja de datos )
| Número de pieza | RTV31 | |
| Descripción | Silicone Rubber Compounds | |
| Fabricantes | MOMENTIVE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RTV31 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
RTV31, RTV60, RTV88
Technical Data Sheet
Silicone Rubber Compounds for High Temperature
Product Description
RTV31, RTV60 and RTV88 silicone rubber compounds are high
temperature two-part silicone elastomers. They are supplied ready-to-use
with a base compound and DBT (dibutyl tin dilaurate) as the standard
curing agent. DBT is suitable for most applications, however other
catalysts are available to facilitate deep section cure, faster cure and
automated mixing.
RTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in
viscosity in the uncured state.
Key Performance
Properties
• Variable work times and cure rates by adjusting the amount and
type of curing agent
• Room temperature cure
• Composition free of solvents and solvent odour
• Excellent adhesion capabilities with primer
• Excellent release properties
• Retention of elastomeric properties at temperatures from -54°C
up to 260°C continuously, and up to 316°C for short periods of
time
•
Applications
Typical high temperature applications for these products include, but are
not limited to:
• Potting and encapsulating electric motors and transformers
• Fabrication of rubber parts
• Casting moulds for low-melting point metals
• Release applications such as rubber rollers
• Thermal insulation
Typical Product
Data
UNCURED PROPERTIES OF RTV
BASE COMPOUNDS
Colour
Consistency
Viscosity, mPa-s
RTV31
Red
Pourable
25,000
RTV60
Red
Pourable
47,000
RTV88
Red
Spreadable
Paste
880,000
Specific Gravity, g/cm³
UNCURED PROPERTIES OF RTV
BASE WITH 0.5% DBT CURING
AGENT ADDED
Work Time @ 25C, hrs
1.42 1.48
RTV31 RTV60
22
1.47
RTV88
0.75
Cure Time @ 25C, hrs
24 24
24
Page 1 of 5
1 page  
RTV31, RTV60, RTV88
PRINCIPAL LOCATIONS – Regional Information
North America
World Headquarters
187 Danbury Road
Wilton, CT 06897, USA
Latin America
Europe, Middle East,
Africa and India
Rodovia Eng. Constâncio Cintra,
Km 78,5
Itatiba, SP – 13255-700, Brazil
D-51368 Leverkusen
Germany
Pacific
Akasaka Park Building - 5-2-20 Akasaka
Minato-ku, Tokyo 107-6112 Japan
CUSTOMER SERVICE CENTERS
North America
Latin America
Europe, Middle East,
Africa and India
Pacific
Charleston, WV 25314, USA
• Specialty Fluids
• UA, Silanes, Resins, and
Specialties
• RTV Products-Elastomers
• Sealants and Adhesives &
Construction
• Argentina & Chile
• Brazil
• Mexico & Central America
• Venezuela, Ecuador, Peru,
Colombia, & Caribbean
• Japan
• China
• Korea
• Singapore
Worldwide Hotline
Worldwide Web
www.momentive.com
T 800.295.2392
F 607.754.7517
T +55.11.4534.9650
F +55.11.4534.9660
T 00.800.4321.1000
T +31.164.293.276
T +81.3.5544.3100
F +31.164.241.750
F +81.3.5544.3101
T 800.523.5862
T 800.334.4674
T 800.332.3390
T 877.943.7325
F 304.746.1654
F 304.746.1623
F 304.746.1623
F 304.746.1654
T +54.11.4862.9544
T +55.11.4534.9650
T +52.55.5899.5135
T +58.212.285.2149
F +54.11.4862.9544
F +55.11.4534.9660
F +52.55.5899.5138
F +58.212.285.2149
T 00.800.4321.1000
T +31.164.293.276
F +31.164.241750
T +81.276.20.6182
T +86.21.5050.4666 (ext. 1523)
T +82.2.6201.4600
T +65.6220.7022
T 800.295.2392
T +607.786.8131
F +607.786.8309
DISCLAIMER: THE MATERIALS, PRODUCTS AND SERVICES OF MOMENTIVE PERFORMANCE MATERIALS INC., MOMENTIVE PERFORMANCE MATERIALS USA INC.,
MOMENTIVE PERFORMANCE MATERIALS ASIA PACIFIC PTE. LTD., MOMENTIVE PERFORMANCE MATERIALS WORLDWIDE INC., MOMENTIVE PERFORMANCE MATERIALS
GmbH & Co. KG, MOMENTIVE PERFORMANCE MATERIALS SUISSE Sarl, THEIR SUBSIDIARIES AND AFFILIATES DOING BUSINESS IN LOCAL JURISDICTIONS (collectively
“SUPPLIERS”), ARE SOLD BY THE RESPECTIVE LEGAL ENTITY OF THE SUPPLIER SUBJECT TO SUPPLIERS’ STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN
THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON
REQUEST. ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SUPPLIERS MAKE NO WARRANTY OR
GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE
EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SUPPLIERS’ PRODUCTS, MATERIALS, SERVICES, RECOMMENDATIONS OR ADVICE. AFOREMENTIONED
EXCLUSIONS OR LIMITATION OF LIABILITY ARE NOT APPLICABLE TO THE EXTENT THAT THE END-USE CONDITIONS AND/OR INCORPORATION CONDITIONS
CORRESPOND TO THE RECOMMENDED CONDITIONS OF USE AND/OR OF INCORPORATION AS DESCRIBED BY SUPPLIER IN ITS PRODUCT DATA SHEET AND/OR
PRODUCT SPECIFICATIONS.
EXCEPT AS PROVIDED IN SUPPLIERS’ STANDARD CONDITIONS OF SALE, SUPPLIERS AND THEIR REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE FOR ANY
LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES DESCRIBED HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of Suppliers’ materials, services, recommendations, or advice for its own particular
use. Each user must identify and perform all tests and analyses necessary to assure that its finished parts incorporating Suppliers’ products, materials, or services will be
safe and suitable for use under end-use conditions. Nothing in this or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary,
supersede, or waive any provision of Suppliers’ Standard Conditions of Sale or this Disclaimer, unless any such modification is specifically agreed to in a writing signed by
Suppliers. No statement contained herein concerning a possible or suggested use of any material, product, service or design is intended, or should be construed, to grant
any license under any patent or other intellectual property right of Suppliers or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for
the use of such material, product, service or design in the infringement of any patent or other intellectual property right.
Copyright 2007 Momentive Performance Materials, Inc. All rights reserved.
7/25/07 - EU-50-068-00
Page 5 of 5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet RTV31.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RTV31 | Silicone Rubber Compounds | MOMENTIVE |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |