DataSheet39.com

What is SX1503?

This electronic component, produced by the manufacturer "Semtech Corporation", performs the same function as "16 Channel Low Voltage GPIO".


SX1503 Datasheet PDF - Semtech Corporation

Part Number SX1503
Description 16 Channel Low Voltage GPIO
Manufacturers Semtech Corporation 
Logo Semtech Corporation Logo 


There is a preview and SX1503 download ( pdf file ) link at the bottom of this page.





Total 30 Pages



Preview 1 page

No Preview Available ! SX1503 datasheet, circuit

WIRELESS & SENSING
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO with NINT and NRESET
GENERAL DESCRIPTION
The SX1501, SX1502 and SX1503 are complete ultra
low voltage General Purpose parallel Input/Output
(GPIO) expanders ideal for low power handheld
battery powered equipment. They allow easy serial
expansion of I/O through a standard I2C interface.
GPIO devices can provide additional control and
monitoring when the microcontroller or chipset has
insufficient I/O ports, or in systems where serial
communication and control from a remote location is
advantageous.
These devices can also act as a level shifter to
connect a microcontroller running at one voltage level
to a component running at a different voltage level.
The core is operating as low as 1.2V while the I/O
banks can operate between 1.2V and 5.5V
independent of the core voltage and each other.
Each GPIO is programmable via 8-bit configuration
registers. Data registers, direction registers, pull-
up/pull-down registers, interrupt mask registers and
interrupt registers allow the system master to
program and configure 4 or 8 or 16-GPIOs using a
standard 400kHz I2C interface.
The SX1501, SX1502 and SX1503 offer a unique
fully programmable logic functions like a PLD to give
more flexibility and reduce external logic gates used
for standard applications.
The SX1501, SX1502 and SX1503 have the ability to
generate mask-programmable interrupts based on
falling/rising edge of any of its GPIO lines. A
dedicated pin indicates to a host controller that a
state change occurred in one or more of the GPIO
lines.
The SX1501, SX1502 and SX1503 each come in a
small QFN-UT-20/28 package. All devices are rated
from -40°C to +85°C temperature range.
ORDERING INFORMATION
Part Number I/O Channels Package
SX1501I087TRT 4 QFN-UT-20
SX1502I087TRT 8 QFN-UT-20
SX1503I091TRT 16 QFN-UT-28
SX1502EVK(1)
8 Evaluation Kit
(1)SX1502I087TRT based, unique evaluation kit for the three
parts.
KEY PRODUCT FEATURES
4/8/16 channel of I/Os
True bi-directional style I/O
Programmable Pull-up/Pull-down
Push/Pull outputs
1.2V to 5.5V independent operating voltage for
all supply rails (VDDM, VCC1, VCC2)
5.5V compatible I/Os, up to 24mA output sink
(no total sink current limit)
Fully programmable logic functions (PLD)
400kHz 2-wire I2C compatible slave interface
Open drain active low interrupt output (NINT)
Bit maskable
Programmable edge sensitivity
Power-On Reset and reset input (NRESET)
Ultra low current consumption of typ. 1uA
-40°C to +85°C operating temperature range
Ultra-Thin 3x3mm QFN-UT-20 package
(SX1501/SX1502)
Ultra-Thin 4x4mm QFN-UT-28 package
(SX1503)
TYPICAL APPLICATIONS
Cell phones, PDAs, MP3 players
Digital camera
Portable multimedia player
Notebooks
GPS Units
Industrial, ATE
Any battery powered equipment
Rev 11 – 16th May 2012
1
www.semtech.com

line_dark_gray
SX1503 equivalent
WIRELESS & SENSING
SX1501/SX1502/SX1503
4/8/16 Channel Low Voltage GPIO
1.2 SX1502 8-channel GPIO
Pin Symbol Type Description
A: Analog
D: Digital
I: Input
O: Output
P: Power
1 NRESET
2 SDA
3 NC1
4 SCL
5 I/O[0]
6 I/O[1]
7 VCC1
8 GND
9 I/O[2]
10 I/O[3]
11 NINT
12 ADDR
13 NC2
14 VDDM
15 I/O[4]
16 I/O[5]
17 VCC2
18 GND
19 I/O[6]
20 I/O[7]
DIO
DIO
-
DI
DIO (*1)
DIO (*1)
P
P
DIO (*1)
DIO (*1)
DO
DI
-
P
DIO (*1)
DIO (*1)
P
P
DIO (*1)
DIO (*1)
Active low reset
I2C serial data line
Leave open, not connected
I2C serial clock line
I/O[0], at power-on configured as an input
I/O[1], at power-on configured as an input
Supply voltage for Bank A I/O[0-3]
Ground Pin
I/O[2], at power-on configured as an input
High sink I/O.
I/O[3], at power-on configured as an input
High sink I/O.
Active low interrupt output
Address input, connect to VDDM or GND
Leave open, not connected
Main supply voltage
I/O[4], at power-on configured as an input
I/O[5], at power-on configured as an input
Supply voltage for Bank B I/O[4-7]
Ground Pin
I/O[6], at power-on configured as an input
I/O[7], at power-on configured as an input
(*1) This pin is programmable through the I2C interface
Table 2 – SX1502 Pin Description
NRESET
SDA
NC1
SCL
I/O[0]
GND
(PAD)
I/O[4]
VDDM
NC2
ADDR
NINT
Figure 2 – SX1502 QFN-UT-20 Pinout
Rev 11 – 16th May 2012
5
www.semtech.com


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for SX1503 electronic component.


Information Total 30 Pages
Link URL [ Copy URL to Clipboard ]
Download [ SX1503.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
SX150The function is Pressure Sensor. SensymSensym
SX1501The function is 4 Channel Low Voltage GPIO. Semtech CorporationSemtech Corporation
SX1502The function is 8 Channel Low Voltage GPIO. Semtech CorporationSemtech Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

SX15     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search