|
|
Número de pieza | A8169-020 | |
Descripción | LED BACKLIGHT DRIVER | |
Fabricantes | AiT Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de A8169-020 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! AiT Semiconductor Inc.
www.ait-ic.com
A8169-020
LED BACKLIGHT DRIVER
PFM/PWM MODE MAX. 3MHZ, VARIABLE FREQUENCY
DESCRIPTION
FEATURES
The A8169-020 variable frequency step-up Converter Up to 19V Output Voltage
drives white LEDs with a constant current to provide Wide Operation Range: 2V to 6V
backlight in cell phones, PDAs, and other hand-held Maximum 3MHz Operating Frequency
devices. It features allowing series connection of the PWM Dimming Control
white LEDs so that the LED currents are identical for Shutdown Current <1uA
uniform brightness. An enable input can be pulsed Current Limit Cycle-by-Cycle
repeatedly to adjust LEDs brightness. The fast 3MHz Low Current Sense Threshold: 200mV
operation frequency allows for smaller capacitor and 19V Over Output Voltage Protection
inductor. Fault condition protection uses cycle-by cycle Available in SOT-26 package
current limiting to sense maximum inductor current and
over-voltage protection. The 0.2V low reference voltage
APPLICATIONS
minimized the power loss across the current sense
resistor.
Compact Back Light Module
The converter can operate from 2V to 6V, and capable of Power Source for LED
delivering maximum 250mA output current at 4-LEDs Constant Current Source
application with 3V input voltage. Quiescent current
drawn from power source is as low as 120uA. All of these
ORDERING INFORMATION
features make A8169-020 be suitable for the portable
devices, which are supplied by a single battery.
Package Type
Part Number
The A8169-020 is available in SOT-26 Package.
TYPICAL APPLICATION
SOT-26
A8169E6R-020
E6
A8169E6VR-020
Note
R: Tape & Reel
V: Halogen free Package
AiT provides all RoHS free products
Suffix “ V “ means Halogen free Package
REV1.2
- JAN 2013 RELEASED , FEB 2013 UPDATED -
-1-
1 page AiT Semiconductor Inc.
www.ait-ic.com
A8169-020
LED BACKLIGHT DRIVER
PFM/PWM MODE MAX. 3MHZ, VARIABLE FREQUENCY
TYPICAL PERFORMANCE CHARACTERISTICS
1. CE Pin Bias Current vs. EN pin Voltage
VIN=VCE
2. CE Pin Current vs. Temperature
VIN=VCE
3. Quiescent Current vs. Supply Voltage
VCE=0V
4. Quiescent Current vs. Supply Voltage
VCE=VIN,VFB=0.3V
5. FB Pin Voltage vs. Supply Voltage
6. FB Pin Voltage vs. Temperature
REV1.2
- JAN 2013 RELEASED , FEB 2013 UPDATED -
-5-
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet A8169-020.PDF ] |
Número de pieza | Descripción | Fabricantes |
A8169-020 | LED BACKLIGHT DRIVER | AiT Semiconductor |
A8169-025 | LED BACKLIGHT DRIVER / PWM MODE 23V STEP-UP SERIES WHITE LED DRIVER | AiT Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |