DataSheet.es    


PDF K3HB-C Data sheet ( Hoja de datos )

Número de pieza K3HB-C
Descripción Digital Indicators User Manual
Fabricantes Omron 
Logotipo Omron Logotipo



Hay una vista previa y un enlace de descarga de K3HB-C (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! K3HB-C Hoja de datos, Descripción, Manual

Digital Indicators
K3HB-R/-P/-C
User's Manual
P
Cat. No. N136-E1-03

1 page




K3HB-C pdf
Application Considerations
Suitability of
Use
Omron Companies shall not be responsible for conformity with any standards,
codes or regulations which apply to the combination of the Product in the Buyer’s
application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which
apply to the Product. This information by itself is not sufficient for a complete deter-
mination of the suitability of the Product in combination with the end product,
machine, system, or other application or use. Buyer shall be solely responsible for
determining appropriateness of the particular Product with respect to Buyer’s appli-
cation, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK
TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A
WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Programmable Omron Companies shall not be responsible for the user’s programming of a pro-
Products
grammable Product, or any consequence thereof.
Disclaimers
Performance
Data
Change in
Specifications
Errors and
Omissions
Data presented in Omron Company websites, catalogs and other materials is pro-
vided as a guide for the user in determining suitability and does not constitute a war-
ranty. It may represent the result of Omron’s test conditions, and the user must
correlate it to actual application requirements. Actual performance is subject to the
Omron’s Warranty and Limitations of Liability.
Product specifications and accessories may be changed at any time based on
improvements and other reasons. It is our practice to change part numbers when
published ratings or features are changed, or when significant construction changes
are made. However, some specifications of the Product may be changed without
any notice. When in doubt, special part numbers may be assigned to fix or establish
key specifications for your application. Please consult with your Omron’s represen-
tative at any time to confirm actual specifications of purchased Product.
Information presented by Omron Companies has been checked and is believed to
be accurate; however, no responsibility is assumed for clerical, typographical or
proofreading errors or omissions.
III

5 Page





K3HB-C arduino
Noise Countermeasures
Do not install the product near devices generating strong high-frequency waves or
surges, such as high-frequency welding and sewing machines.
(1) Mount a surge suppressor or noise filter to peripheral devices generating noise, in
particular, motors, transformers, solenoids, and magnet coils.
Line filter
Digital Indicator
+
Digital
Indicator
-
Surge suppressor
(2) In order to prevent inductive noise, wire the lines connected to the terminal block
separately from power lines carrying high voltages or currents. Do not wire in parallel
with or in the same cable as power lines. Other measures for reducing noise include
running lines along separate ducts and using shield lines.
Example of Countermeasures for Inductive Noise on Input Lines
+
Digital Indicator
Signal input
2 conductors with shield
-
(3) If a noise filter is used for the power supply, check the voltage and current, and install
the noise filter as close to the product as possible.
(4) Reception interference may occur if the product is used close to a radio, television, or
wireless.
IX

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet K3HB-C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
K3HB-CDigital Indicators User ManualOmron
Omron
K3HB-CUp/Down Counting Pulse IndicatorOmron
Omron
K3HB-HTemperature IndicatorOmron
Omron
K3HB-PDigital Indicators User ManualOmron
Omron

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar