AH1822 Datasheet PDF - Diodes
Part Number | AH1822 | |
Description | MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH | |
Manufacturers | Diodes | |
Logo | ||
There is a preview and AH1822 download ( pdf file ) link at the bottom of this page. Total 9 Pages |
Preview 1 page No Preview Available ! Features
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
General Description
• Micropower operation
• Operation with magnetic field of either north or south
pole (omnipolar)
• 2.5V to 5.5V battery operation
• Chopper stabilized
• Superior temperature stability
• Extremely Low Switch-Point Drift
• Insensitive to Physical Stress
• Good RF noise immunity
• -40°C to 85°C operating temperature
• ESD (HBM) > 5KV
• DFN2015-6 and DFN3020-6: Available in “Green”
Molding Compound (No Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)
AH1822 is comprised of two Hall effect plates and an open-drain
output driver, mainly designed for battery-operation, hand-held
equipment (such as Cellular and Cordless Phone, PDA). The
total power consumption in normal operation is typically 24μW
with a 3V power source.
Either north or south pole of sufficient strength will turn the output
on. The output will be turned off under no magnetic field. While
the magnetic flux density (B) is larger than operating point (Bop),
the output will be turned on (low), the output is held until B is
lower than release point (Brp), then turned off.
Applications
• Cover switch in clam-shell cellular phones
• Cover switch in Notebook PC/PDA
• Contact-less switch in consumer products
Ordering Information
AH 1822 - XXX G - 7
Package
FT4 : DFN2015-6
FU4 : DFN3020-6
Green
G : Green
Packing
7 : Tape & Reel
Device
AH1822-FT4G-7
AH1822-FU4G-7
Package
Code
FT4
FU4
Packaging
(Note 2)
DFN2015H4-6
DFN3020H4-6
7” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
3000/Tape & Reel
-7
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH1822 Rev. 5
1 of 9
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
|
|
AH1822
MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR
SWITCH
Magnetic Characteristics (TA=25°C, Vdd=3V, Note 6, 7)
Symbol
Bops(south pole to brand side)
Bopn(north pole to brand side)
Brps(south pole to brand side)
Brpn(north pole to brand side)
Bhy( Bopx − Brpx )
Characteristic
Operate Point
Release Point
Hysteresis
Min
-
-55
10
-
5
Typ.
28
-28
20
-20
8
Notes: 6. Typical data is at Ta = 25°C, Vdd = 3V, and for design information only.
7. Operating point and release point will vary with supply voltage and operating temperature.
Output
Output
(1mT=10 Gauss)
Max Unit
55
-
- Gauss
-10
-
Vcc ( off-state )
Turn on
Bhy
Turn off
( on-state )
Vsat
Bopn Brpn 0
( Magnetic flux density B )
( off-state ) Vcc
Turn off
Bhy
Turn on
Vsat
( on-state )
0 Brps Bops
( Magnetic flux density B )
Performance Characteristics
TA (°C) 25 50 60 70 80 85 90 100 110 120 130 140 150
PD (mW) 230 184 166 147 129 120 110 92 74 55 37 18 0
PD (m W )
300
P ow er D issipation C urve
200
100
0
0
25
50
75 85 100
125
150
TA (。 C )
AH1822 Rev. 5
5 of 9
www.diodes.com
FEBRUARY 2009
© Diodes Incorporated
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AH1822 electronic component. |
Information | Total 9 Pages | |
Link URL | [ Copy URL to Clipboard ] | |
Download | [ AH1822.PDF Datasheet ] |
Share Link :
Electronic Components Distributor
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
Part Number | Description | MFRS |
AH182 | The function is (AH182 / AH183) LOW POWER HALL EFFECT SWITCH. Diodes Incorporated | |
AH182 | The function is (AH182 / AH183) Low power Hall Effect Switch. ANACHIP | |
AH1822 | The function is MICROPOWER OMNIPOLAR HALL-EFFECT SENSOR SWITCH. Diodes | |
Semiconductors commonly used in industry:
1N4148 |  
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AH18
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA |