|
|
Número de pieza | CQ-2333 | |
Descripción | High-Speed Small Current Sensor | |
Fabricantes | Asahi Kasei Microsystems | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CQ-2333 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
No Preview Available ! [CQ-2333]
CQ-2333
High-Speed Small Current Sensor
1. Genaral Description
CQ-2333 is an open-type current sensor using a Hall sensor which outputs the analog voltage proportional
to the AC/DC current. Quantum well ultra-thin film InAs (Indium Arsenide) is used as the Hall sensor,
which enables the high-accuracy and high-speed current sensing. Simple AI-Shell package with the Hall
sensor, magnetic core, and primary conductor realizes the space-saving and high reliability.
2. Feartures
- Bidirectional type
- Electrical isolation between the primary conductor and the sensor signal
- 5V single supply operation
- Ratiometric output
- Low variation and low temperature drift of sensitivity and offset voltage
- Low noise output: 1.2mVrms (typ.)
- Fast response time: 1μs (typ.)
- Small-sized package, halogen free
- Standards: IEC/UL 60950-1, UL 508, CSA C22.2 No. 14
IEC 62109 (certification pending)
MS1572-E-01
-1-
2014/04
1 page [CQ-2333]
7. Safety Standards
・IEC/UL 60950-1 – Information Technology Equipment – Edition 2. (File No.E359197)
・UL 508 – Industrial Control Equipment – Edition 17. (File No. E353882)
・CAN/CSA C22.2 No. 14-10 – Industrial Control Equipment – Edition 12.(File No. E353882)
8. Absolute Maximum Ratings
Table 3. Absolute maximum ratings
Parameter
Symbol Min.
Max. Units
Notes
Supply Voltage
Analog Output Current
Storage Temperature
VDD −0.3
IOUT
−1
Tstg −40
6.5 V VDD pin
1 mA VOUT pin
150 °C
WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal
operation is not guaranteed at these extremes.
9. Recommended Operating Conditions
Table 4. Recommended operating conditions
Parameter
Symbol Min. Typ. Max. Units
Notes
Supply Voltage
Analog Output Current
Output Load Capacitance
Operating Ambient
Temperature
VDD
IOUT
CL
Ta
4.5 5.0
−0.5
−40
5.5 V
0.5 mA VOUT pin
100 pF VOUT pin
110 °C See Figure 4
WARNING: Electrical characteristics are not guaranteed when operated at or beyond these conditions.
(95C)
(32 A)
Conditions ・Mounted on the test board complying with the EIA/JEDEC Standards (EIA/JESD51-xx.)
・VDD=5.5V
Figure 4. Primary current derating curve of CQ-2333
NOTE) Cooling or thermal radiation will improve the derating curve above.
MS1572-E-01
-5-
2014/04
5 Page 13.2. Pad Dimension
[CQ-2333]
Unit: mm
Figure 11. Package outline
If 2 or more trace layers are used as the current paths, please make enough number of through-holes to flow
current between the trace layers.
MS1572-E-01
- 11 -
2014/04
11 Page |
Páginas | Total 15 Páginas | |
PDF Descargar | [ Datasheet CQ-2333.PDF ] |
Número de pieza | Descripción | Fabricantes |
CQ-2332 | High-Speed Small Current Sensor | Asahi Kasei Microsystems |
CQ-2333 | High-Speed Small Current Sensor | Asahi Kasei Microsystems |
CQ-2334 | High-Speed Small Current Sensor | Asahi Kasei Microsystems |
CQ-2335 | High-Speed Small Current Sensor | Asahi Kasei Microsystems |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |