DataSheet39.com

What is CDP-TX-02F-R?

This electronic component, produced by the manufacturer "CIRCUIT DESIGN", performs the same function as "UHF Narrow band radio data module".


CDP-TX-02F-R Datasheet PDF - CIRCUIT DESIGN

Part Number CDP-TX-02F-R
Description UHF Narrow band radio data module
Manufacturers CIRCUIT DESIGN 
Logo CIRCUIT DESIGN Logo 


There is a preview and CDP-TX-02F-R download ( pdf file ) link at the bottom of this page.





Total 23 Pages



Preview 1 page

No Preview Available ! CDP-TX-02F-R datasheet, circuit

OPERATION GUIDE
UHF Narrow band radio data module
CDP-TX/RX-02F-R 434 MHz
Operation Guide
Version 1.6 (Feb. 2014)
OG_CDP-02F-R_v16e
CIRCUIT DESIGN, INC.,
7557-1 Hotaka, Azumino
Nagano 399-8303 JAPAN
Tel: + +81-(0)263-82-1024
Fax: + +81-(0)263-82-1016
http://www.circuitdesign.jp

line_dark_gray
CDP-TX-02F-R equivalent
OPERATION GUIDE.
CDP-RX-02F(P)-R Receiver
All ratings at 25°C +/- 5°C unless otherwise noted
Parameter
General characteristics
Rating
Conditions
Applicable standard
EN 300 220 –2
Communication method
One way
Emission class
F1D
Operating frequency range
433.1875 – 434.7750 MHz
Operating temperature range
-20 to + 60 °C
No dew condensation
Storage temperature range
-30 to + 70 °C
No dew condensation
Aging rate
Initial freq. tolerance
Max. +/- 1 ppm / year
Max. +/- 2 ppm
TX freq. / RX Local Freq.
At delivery *1
Dimension
30 x 50 x 9 mm
Excluding protrusion
Weight
Electrical specification
20 g Not including the antenna
Oscillation system
PLL controlled VCO
Channel spacing
25 kHz
Number of RF channels
128 ch (12.5 kHz step) Default channel at delivery (434.775 MHz)
Data rate
300 to 4800 bps
(Pulse length Min. 208 us Max. 20 ms)
DI input level
L = Gnd H = 3V to Vcc
Data polarity
Positive
TX DI vs RX DO
PLL reference frequency
21.25 kHz
TCXO
Antenna impedance
50 ohm
Nominal
Operating voltage
3 – 12 V
Consumption current
Receiver electrical specification
Typ. 30 mA at 3 V
Typ. 33 mA at 12 V
Receiver type
Double superheterodyne PLL synthesizer
Bit error rate (0 error /2556 bits)
Typ. -116 dBm
At DO 4800 bps PN9 (-20°C to + 60°C)
Bit error rate (1% bit error)
Typ. -120 dBm
At DO 4800 bps PN9 (-20°C to + 60°C)
Sensitivity (12 dB / SINAD)
Typ. -120 dBm
fm1kHz, Dev.+/-2.0kHz, CCITT (-20 to + 60°C)
Frequency stability
Max. +/- 4 ppm
- 20 to 60°C with reference frequency at 25°C
Adjacent channel selectivity
60 dB
2 signal / 25 kHz / BER 1% / PN9 4800 bps
Blocking
84 dB
2 signal / All / BER 1% / PN9 4800 bps
Spurious radiation
- 60 dBm
- 50 dBm
Below 1 GHz
Above 1 GHz
Distortion
- 30 dB
1 kHz Dev =+/-2.0 kHz CCITT (RF level –30 dBm)
S/N ratio
35 dB
1 kHz Dev =+/-2.0 kHz CCITT (RF level –30 dBm)
RSSI
235 mV +/- 40 mV
195 mV +/- 40 mV
At –110 dBm
At –116 dBm
AF output level
145 mV +/- 30 mV
110 mV +/- 30 mV
fmod = +/-2.0 kHz fm = 1.2 kHz (RF level -30 dBm)
fmod = +/-2.0 kHz fm = 2.4 kHz (RF level -30 dBm)
RSSI rising time
Typ. 20 ms / Max. 50 ms Channel change (50 kHz) (-20°C to + 60°C)
Typ. 40 ms / Max. 70 ms At power on (-20°C to + 60°C)
Time to valid Data out *2
Typ. 50 ms / Max. 100 ms Channel change (50 kHz) (-20°C to + 60°C)
Typ. 70 ms / Max. 140 ms At power on (-20°C to + 60°C)
Specifications are subject to change without prior notice
*1 Initial frequency tolerance: At delivery
Initial frequency tolerance is defined as frequency drift within 1 year after the final adjustment
*2 Time to valid output signal:
Valid output signal is determined at the point where the Bit Error Rate meter starts detecting a 4800bps,
1010.. repeated signal.
The valid output signal varies with the temperature conditions. You must conduct field testing to verify the
waiting time for a valid output signal in the user system.
OG_CDP-02F-R_v16e
5
Circuit Design, Inc.


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for CDP-TX-02F-R electronic component.


Information Total 23 Pages
Link URL [ Copy URL to Clipboard ]
Download [ CDP-TX-02F-R.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
CDP-TX-02F-RThe function is UHF Narrow band radio data module. CIRCUIT DESIGNCIRCUIT DESIGN

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

CDP-     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search