DataSheet39.com

What is G1100?

This electronic component, produced by the manufacturer "ETC", performs the same function as "Wideband Multifunction Reception System GaAs MMIC Completely Covers GPS and CDMA".


G1100 Datasheet PDF - ETC

Part Number G1100
Description Wideband Multifunction Reception System GaAs MMIC Completely Covers GPS and CDMA
Manufacturers ETC 
Logo ETC Logo 


There is a preview and G1100 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! G1100 datasheet, circuit

Wideband Multifunction Reception System GaAs MMIC Completely Covers GPS
and CDMA
CXG1100TN
CXG1115ER
The gpsOne system is seen as a revolutionary technology for
the next generation of position information services. The gpsOne
system uses information from GPS satellites and the CDMA net-
work to complement each other and acquire reliable positioning
information. (See figure 1.)
A position information service that uses gpsOne cellular phones
is scheduled to start service this fall in Japan.
Sony has now developed a chip set that responds to the needs
of this market.
The CXG1100TN is a wideband DPDT switch, and the CXG1115ER
is a dual-mode front-end IC.
These devices adopt Sony’s unique JFET process and mounting
technologies to achieve high functionality and miniaturization.
CXG1100TN
s Switching can be controlled from
CMOS lines
s Wide bandwidth, low insertion loss,
and low distortion
s Provided in an ultraminiature package
CXG1115ER
s Dual band support
s Circuit area reduced by the adoption
of 2× frequency multiplier technology
s High gain, low noise, low distortion
s Provided in an ultraminiature package
CXG1100TN DPDT Switch
Switching Can Be Controlled
from CMOS Lines
The CXG1100TN is a DPDT*1 antenna
switch MMIC. While conventional
single band systems use a SPDT*2
switch, the CXG1100TN supports dual-
band systems with DPDT operation. In
this device, Sony integrated logic
circuits on the same chip by using
Sony’s unique GaAs JFET E/D hybrid
process. This device can be directly con-
trolled from CMOS control lines.
Wide Bandwidth, Low
Insertion Loss, and Low
Distortion
Since the CXG1100TN covers the wide
bandwidth of up to 3 GHz, it is optimal
VOICE
Our duty as chip designers is to
provide the market with ICs with
distinctive features and high
performance in a timely manner
and at a low price. The chip set
introduced here is a product that
meets all of these conditions,
and we are sure that our custom-
ers will find it more than satis-
factory.
for switching between two bands in the
quasi-microwave band. Furthermore, it
achieves a low insertion loss and low
distortion by adopting a Sony JFET pro-
cess that features single positive supply
voltage operation. (See table 1.)
CXG1115ER Low-Noise
Amplifier/Mixer
The CXG1115ER is a gpsOne low-
noise amplifier and downconversion
mixer IC that uses Sony’s GaAs JFET
process.
Dual Band Support
The CXG1115ER receiver IC provides
a bypass switch in the CDMA system
low-noise amplifier block, can switch
gain appropriately for strong, medium,
and weak electric field reception con-
ditions, and furthermore provides a low-
current mode for standby operation. It
consists of two circuit systems, one for
the 850 MHz band CDMA system and
one for the 1575 MHz band GPS sys-
tem, and fully supports both CDMA and
GPS by providing a control switch.
Circuit Area Reduced by the
Adoption of 2× Frequency
Multiplier Technology
By doubling the frequency of the LO
input signal from the LO input (740
MHz) to 1480 MHz in the GPS system
mixer block, the CXG1115ER is able
to share a single LO circuit between two
systems. This reduces the circuit area,
and in addition to reducing costs, allows
a smaller package to be used providing
greater liberty in PWB mounting design.
High Gain, Low Noise, Low
Distortion
One feature of the CXG1115ER is that
it achieves a good balance between high
gain, low noise, and low distortion. (See
figure 3.) Additionally, it also provides
a medium-gain mode to further improve
distortion characteristics and a low
power mode to conserve power. Appli-
cations can easily obtain desired char-
acteristics by controlling the control
switching inputs.
Provided in Ultraminiature
Packages
The CXG1100TN is provided in a 10-
pin TSSOP (3.2 × 2.8 mm) package, and
the CXG1115ER is provided in a 24-
pin VQFN (4.0 × 4.0 mm) package.
These ultraminiature packages allow the
mounting area to be reduced signifi-
cantly.
*1 DPDT: Dual Pole Dual Throw
*2 SPDT: Singlel Pole Dual Throw


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for G1100 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ G1100.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
G1100The function is Wideband Multifunction Reception System GaAs MMIC Completely Covers GPS and CDMA. ETCETC

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

G110     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search